Solid Body Mounts
4 posters
Solid Body Mounts
Does anyone know were to get solid body mounts? I am looking for them for my 75 Chevelle. Thanks.
Curtb- G3GM Newbie
- Street Cred : 0
Re: Solid Body Mounts
Not sure where you can find them sir. But unless you're not going to be driving it on the street I would not recommend them. You'll feel every little rock or bump in the road.
fasrnur- G3GM Enthusiast
- Street Cred : 9
Re: Solid Body Mounts
What exactly are you after? There are other options rather than a solid that can work well. And if you are looking for body stiffness, I would look at the frame before body bushings.
bracketchev1221- G3GM Enthusiast
- Street Cred : 16
Re: Solid Body Mounts
I am building a mostly strip car with a 10 point roll cage that will be welded directly to the frame. So I don't want the body flexing separately from the chassis.
Curtb- G3GM Newbie
- Street Cred : 0
Re: Solid Body Mounts
Poly mounts will be fine. The cage will stiffen the car up. Make sure the rear bars go down to the upper spring pocket to support it.
bracketchev1221- G3GM Enthusiast
- Street Cred : 16
Re: Solid Body Mounts
I have not even been able to find a company that makes Polly body mounts that say they will fit my year chevelle. All I have been able to find are rubber replacements from OPGI.
Curtb- G3GM Newbie
- Street Cred : 0
Re: Solid Body Mounts
I used 68-72 convertible Chevelle mounts. Not sure if they make poly for that gen either but it might be worth a shot.
Hawk03- G3GM Enthusiast
- Street Cred : 18
Re: Solid Body Mounts
Thanks for the information. Will any 68-72 mounts work or just the convertible ones?
Curtb- G3GM Newbie
- Street Cred : 0
Re: Solid Body Mounts
Count the number of bushings you need and compare them. The only difference between the coupe and convertible was the convertible had 2 extra bushings at the firewall. I just replaced them on my 70 SS and all the bushing holes in the frame are the same size. All the bushings are the same size except the very last 2 in the rear. But if you got them for a convertible, there is a convertible addition kit that gives 2 more.
bracketchev1221- G3GM Enthusiast
- Street Cred : 16
Similar topics
» Body Mounts: How to remove & replace with body on
» body mounts for 73 chevelle??
» Body Mounts: Which Supplier?
» body mounts for 73 chevelle??
» Body Mounts: Which Supplier?
Permissions in this forum:
You cannot reply to topics in this forum
Thu Dec 05, 2024 10:41 am by zucchi
» I have posted on here for info and help
Thu Dec 05, 2024 12:11 am by muldokken
» Roll Call and Car showcase
Fri Nov 29, 2024 5:24 pm by 76Chevelle2Tone
» Happy Thanksgiving 2024
Thu Nov 28, 2024 12:21 pm by Limey SE
» Life & Back On The Radio
Thu Nov 28, 2024 1:46 am by knightfan26917
» Monte Carlo -75
Wed Nov 27, 2024 12:57 pm by Finn Monte
» 1974 Pontiac Grand Prix
Mon Nov 25, 2024 5:06 pm by Iggy
» Ads
Mon Nov 25, 2024 12:52 am by 76Chevelle2Tone
» 1975 El Camino - long term project
Sun Nov 24, 2024 8:33 pm by tgaetto
» station wagon tailgate release
Sat Nov 23, 2024 8:28 pm by bucket