G3GM
Would you like to react to this message? Create an account in a few clicks or log in to continue.

G3GM 1973 to 1977 A-bodys. Chevelles, Monte Carlos, El Caminos, Laguna, 442, Cutlass, Malibu, GTO, LeMans, Century, Regal, Grand Am, Grand Prix, Sprint, Gran Sport, Can Am, Hurst-olds, and other 73-77 A-bodies


Rack and Pinion conversion

5 posters

G3GM :: Media :: G3 Project Pictures

Go down

Rack and Pinion conversion Empty Rack and Pinion conversion

Post by ratnfested Tue Sep 05, 2017 1:43 pm

Hi all.

I want to put a rack in my Chevelle. Anyone have an tips? I know kits exist for 68-72 Chevelles and some Fbody cars. I think I want to measure the frame rail spread on those 2 models and see if they might work on mine.

Rack and Pinion conversion Chevelle,%20Jim's%20Nova%20and%20Memphis%20Belle%20041
ratnfested
ratnfested
G3GM Member
G3GM Member

Street Cred : 2

Back to top Go down

Rack and Pinion conversion Empty Re: Rack and Pinion conversion

Post by fasrnur Tue Sep 05, 2017 10:17 pm

Nice car sir. I've wondered the same. Here's one to check out?

http://www.flamingriver.com/index.php/products/c0007/s0010
fasrnur
fasrnur
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 9

Back to top Go down

Rack and Pinion conversion Empty Re: Rack and Pinion conversion

Post by ratnfested Wed Sep 06, 2017 9:07 am

Thanks I will have to call them to see if they have specs.
ratnfested
ratnfested
G3GM Member
G3GM Member

Street Cred : 2

Back to top Go down

Rack and Pinion conversion Empty Re: Rack and Pinion conversion

Post by Silentknight85 Mon Dec 18, 2017 11:03 am

ratnfested wrote:Thanks I will have to call them to see if they have specs.

Any updates?
Silentknight85
Silentknight85
Donating Member
Donating Member

Street Cred : 4

Back to top Go down

Rack and Pinion conversion Empty Re: Rack and Pinion conversion

Post by bracketchev1221 Mon Dec 18, 2017 5:07 pm

I would look into a universal rack and then modify the tie rods for what you need. My 70 is a universal setup.
bracketchev1221
bracketchev1221
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 16

Back to top Go down

Rack and Pinion conversion Empty Re: Rack and Pinion conversion

Post by calsdad Sun Dec 31, 2017 12:29 pm

If you're thinking of putting a rack and pinion setup on a 73-77 Chevelle I would start by looking at what's available for the 70-81 Camaro / Firebird. The front end suspension on the 73-77 Chevelles and 70-81 F-bodies are VERY similar. You can swap things like sway bars between the two - so a rack and pinion setup meant for an F-body - would very likely be the easiest bolt in option for the 73-77 A body cars.
calsdad
calsdad
G3GM Newbie
G3GM Newbie

Street Cred : 0

Back to top Go down

Rack and Pinion conversion Empty Re: Rack and Pinion conversion

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

G3GM :: Media :: G3 Project Pictures

 
Permissions in this forum:
You cannot reply to topics in this forum