G3GM
Would you like to react to this message? Create an account in a few clicks or log in to continue.

G3GM 1973 to 1977 A-bodys. Chevelles, Monte Carlos, El Caminos, Laguna, 442, Cutlass, Malibu, GTO, LeMans, Century, Regal, Grand Am, Grand Prix, Sprint, Gran Sport, Can Am, Hurst-olds, and other 73-77 A-bodies


Weatherstripping advice

5 posters

G3GM :: G3 Tech :: Body

Go down

Weatherstripping advice Empty Weatherstripping advice

Post by bitterfitter Wed Nov 04, 2015 9:57 pm

So I am at the point of installing weatherstripping and I was looking over what I have. I see how the roof rail w/s fits into metal pieces that screw onto the car. Is there a trick or technique to installing this w/s properly? Kinda looks like I mount the metal strips to the car with screws and w/s adhesive behind it. Then the w/s gets more adhesive and some how gets pushed into this metal strip. This is where I am unsure of the easiest way to do it? Any advice from those who have done it?

bitterfitter
Donating Member
Donating Member

Street Cred : 9

Back to top Go down

Weatherstripping advice Empty Re: Weatherstripping advice

Post by Joe73 Wed Nov 04, 2015 10:16 pm

The metal pieces get screwed to the car with this under them as a sealant.  http://www.ebay.com/itm/201033833139?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Then the weatherstrip just gets pushed into the grooves.  I use a credit card or a wood paint stick to push it in.  Pretty easy actually.
Joe73
Joe73
Donating Member
Donating Member

Street Cred : 83

Back to top Go down

Weatherstripping advice Empty Re: Weatherstripping advice

Post by Limey SE Wed Nov 04, 2015 10:21 pm

subscribed I have to mine as well

___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE
Limey SE
Management
Management

Street Cred : 98

Back to top Go down

Weatherstripping advice Empty Re: Weatherstripping advice

Post by bitterfitter Wed Nov 04, 2015 10:30 pm

Is it easier to insert one side or the other of the weatherstripping ? Almost looks like the outside should go in first and push in the inside edge last.

bitterfitter
Donating Member
Donating Member

Street Cred : 9

Back to top Go down

Weatherstripping advice Empty Re: Weatherstripping advice

Post by chevellelaguna Thu Nov 05, 2015 4:52 pm

Use some soapy water as well, it'll slip in like a champ. Like you said slip one edge in first and work the opposite side in with a credit card or plastic bone.
chevellelaguna
chevellelaguna
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 16

Back to top Go down

Weatherstripping advice Empty Re: Weatherstripping advice

Post by bitterfitter Thu Nov 05, 2015 5:28 pm

Does the weatherstripping get adhesive to hold it into the metal strip? It looks like it should but wouldn't the soapy water affect this?

bitterfitter
Donating Member
Donating Member

Street Cred : 9

Back to top Go down

Weatherstripping advice Empty Re: Weatherstripping advice

Post by Mcarlo77 Thu Nov 05, 2015 6:50 pm

I know they used adhesive at the factory. I installed some NOS w/strips this summer and the fit was so good that I didn't bother with the adhesive. It holds just fine...but, have to admit there was a method to my madness as I wanted them to be removable when time came to paint the car.
Mcarlo77
Mcarlo77
Donating Member
Donating Member

Street Cred : 78

Back to top Go down

Weatherstripping advice Empty Re: Weatherstripping advice

Post by Joe73 Thu Nov 05, 2015 7:15 pm

I dont recall any adhesive when I replaced mine in the 80s.
Joe73
Joe73
Donating Member
Donating Member

Street Cred : 83

Back to top Go down

Weatherstripping advice Empty Re: Weatherstripping advice

Post by chevellelaguna Thu Nov 05, 2015 8:55 pm

There was adhesive from the factory, similar to 3M weatherstrip adhesive. As long as you're not drowning your car with soapy water, couple drops diluted in a spray bottle is sufficient, again you're just spritzing the weatherstrip, not hosing it down. I fail to understand that the w/s won't go into the channel easily, hook one end in , and even using your thumb should force the rest into the groove. The use of the W/S adhesive will prevent the w/s from getting pulled down by the glass on a hot day.
chevellelaguna
chevellelaguna
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 16

Back to top Go down

Weatherstripping advice Empty Re: Weatherstripping advice

Post by bitterfitter Thu Nov 05, 2015 10:11 pm

It may go into the track easily. I haven't begun to install these yet. Just looking for a heads up.
I just finished the vinyl top around the skyroof and installed that w/s. Now I just have to wait for the foam tape that was mentioned above. Then these pieces go on.

bitterfitter
Donating Member
Donating Member

Street Cred : 9

Back to top Go down

Weatherstripping advice Empty Re: Weatherstripping advice

Post by chevellelaguna Thu Nov 05, 2015 10:25 pm

Awesome, like you said good to be prepared for possible issues that may arise.
chevellelaguna
chevellelaguna
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 16

Back to top Go down

Weatherstripping advice Empty Re: Weatherstripping advice

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

G3GM :: G3 Tech :: Body

 
Permissions in this forum:
You cannot reply to topics in this forum