Re: Has anybody ACTUALLY swapped a 73 Laguna nose?

by dynchel Mon Jan 26, 2015 1:47 pm

http://www.g3gm.com/t6260-oe-looking-tucked-bumpers?highlight=OE+looking+tucked+bumpers
Here's,what I did.

by dynchel Mon Jan 26, 2015 1:49 pm

However if you are going to drill & weld i would leave the bumper on to try to get the bumper as close as possible. You can always fine tune with shims.

by Roadcaptain S3 Mon Jan 26, 2015 1:59 pm

Thanks...that didn't show up on my search.

I'll probably drill, unless by some miracle i can find rear bumper shocks cheap.

by Limey SE Mon Jan 26, 2015 6:59 pm

I will ask my derby Friend Captain he some parts cars out there

by Joe73 Mon Jan 26, 2015 8:41 pm

Capt, are you just tucking your rear bumper? Got a little confused with the talk of the 73 nose. It would be pretty difficult to put a 73 rear bumper on a 74-77 car. 73 doesnt use shocks in the rear. The 73 rear bumper has brackets that bolt to the SIDE of the frame. I have pics if you need them.

Just fyi.

by Limey SE Mon Jan 26, 2015 9:16 pm

Joe73 wrote:Capt, are you just tucking your rear bumper? Got a little confused with the talk of the 73 nose. It would be pretty difficult to put a 73 rear bumper on a 74-77 car. 73 doesnt use shocks in the rear. The 73 rear bumper has brackets that bolt to the SIDE of the frame. I have pics if you need them.

Just fyi.

No he is just wanting to tuck the stock ones he has already and I am trying to locate some shocks so he wont trash his stock ones

by Joe73 Mon Jan 26, 2015 9:17 pm

Ok, cool.

by Roadcaptain S3 Mon Jan 26, 2015 10:24 pm

I have a 73 nose and 74 grille i got with a pile of other parts. I was going to put it on if it was pretty much just a bolt on deal. I found an El Camino thread where a guy was doing it on a 77. His was a LOT of work. Anthony was trying to explain it to my dumba$$ and it looked like a little more work than I want to do right now. So...dynch was explaining the front bumper tuck instead. Now Anthony is looking for rear bumper shocks I can put up front so i don't have to drill the 77 front shock/piston thingys on mine.

As you can see, these guys go out of their way to help a bumbling, indecisive fool such as me! Embarassed

by Joe73 Mon Jan 26, 2015 11:43 pm

I think you'll get it. Just have to put some thought into it.

Dont quote me, and I dont know if it was the front or rear bumper, but I remember reading somewhere that someone played around with their mounting brackets or something and was able to tuck their bumper without drilling the shocks.

by dynchel Tue Jan 27, 2015 7:45 am

Joe73 wrote:I think you'll get it. Just have to put some thought into it.

Dont quote me, and I dont know if it was the front or rear bumper, but I remember reading somewhere that someone played around with their mounting brackets or something and was able to tuck their bumper without drilling the shocks.

That would be me, here's the thread.

http://www.g3gm.com/t6260-oe-looking-tucked-bumpers?highlight=OE+looking+tucked+bumpers

by Wallyuph Tue Jan 27, 2015 1:13 pm

On my front bumper I just put shocks in a press to collapsed them and welded them in a short tack in 4 spots. trimmed filler pieces and walla done.

by Roadcaptain S3 Tue Jan 27, 2015 1:15 pm

How far did you collapse them? I measured and looks like about three inches back is as far as the grille will allow.

by Wallyuph Tue Jan 27, 2015 1:20 pm

For my 73 collapsed them all the way. Heck its sticks out far enough I wanted all I could take out with a easy cure.

here is the only photos I have of front end to help you see. Car is in storage for winter
Has anybody ACTUALLY swapped a 73 Laguna nose? - Page 2 <a href=

Has anybody ACTUALLY swapped a 73 Laguna nose? - Page 2 <a href=

Has anybody ACTUALLY swapped a 73 Laguna nose? - Page 2 Img_5511

" />

Has anybody ACTUALLY swapped a 73 Laguna nose? - Page 2 Img_5510

" />

by Sponsored content