Rear axle codes
2 posters
G3GM :: G3 :: General Discussion
Page 1 of 1
Rear axle codes
Starting playing with my chevelle. I took a look at the axle to grab some codes. This is just the axle I'm running because it was already set up with the gears I wanted (4.10). My original 3.42 axle is in storage. When I bought this axle the seller said it came out of a monte carlo but I forgot what year. I got the codes off it and its not matching my books. Would like to know what it was from and what gears originally came in it. Just for curiosity.
Code is clean and legible after a quick spray with brake cleaner and hit it with the wire brush.
Here's the code.
ABC 7 37 1
Anyone have any clue on this one??
thanks guys.
Just in case someone needs to know. It measures 55" from inside edge of the backing plate to the inside edge of the other backing plate. Just fyi.
Code is clean and legible after a quick spray with brake cleaner and hit it with the wire brush.
Here's the code.
ABC 7 37 1
Anyone have any clue on this one??
thanks guys.
Just in case someone needs to know. It measures 55" from inside edge of the backing plate to the inside edge of the other backing plate. Just fyi.
Joe73- Donating Member
- Street Cred : 83
Re: Rear axle codes
My buddy bought the cleanest '77 cutlass I had ever seen (bought new in so cal and spent its entire life there until was brought to Ohio to be sold... By original owner) the whole underside was a machinery grey color. I can't say specifically the backing plates were that color(but they would contrast nicely against all the black) As for the gasket I've used tool box drawer liner as gasket material when all else fails. I guess I failed and posted this under the wrong topic...my bad.
Last edited by dynchel on Mon Jul 07, 2014 2:47 pm; edited 1 time in total (Reason for editing : wrong topic fail on my part)
dynchel- Donating Member
- Street Cred : 40
G3GM :: G3 :: General Discussion
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Today at 12:58 pm by Keith Seymore
» Roll Call and Car showcase
Today at 10:20 am by g3chevy / Mr Pontiac
» Central Texas Noob
Today at 10:16 am by g3chevy / Mr Pontiac
» Welcome Keith Seymore
Today at 10:03 am by g3chevy / Mr Pontiac
» Wanted: Front park lamp assemblies
Today at 9:57 am by g3chevy / Mr Pontiac
» 75 Hurst Olds T-tpos
Today at 9:44 am by g3chevy / Mr Pontiac
» G3 Chevy rims- help ID these
Tue Oct 29, 2024 8:26 pm by Limey SE
» 75 el camino project.
Mon Oct 28, 2024 12:03 pm by zucchi
» Have had a few questions
Sun Oct 27, 2024 12:04 pm by Limey SE
» vinyl top removal
Sat Oct 26, 2024 11:30 pm by 76Chevelle2Tone