G3GM
Would you like to react to this message? Create an account in a few clicks or log in to continue.

A/C VIR valve

3 posters

Go down

A/C VIR valve Empty A/C VIR valve

Post by Pontichev327 Fri Aug 16, 2013 2:01 pm

Shop says my VIR valve is bad. What are the options ? New VIR, rebuilt VIR, or VIR eliminator. Who has best price? OK lets hear some opionions. I don't have 500.00 to spend this month.This is for the 75 Laguna.
Pontichev327
Pontichev327
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 7

Back to top Go down

A/C VIR valve Empty Re: A/C VIR valve

Post by DoctorLarry Fri Aug 16, 2013 2:07 pm

I went with a VIR eliminator. It works fine and I switched to R134a at the same time.

DoctorLarry
G3GM Member
G3GM Member

Street Cred : 3

Back to top Go down

A/C VIR valve Empty Re: A/C VIR valve

Post by pila Fri Aug 16, 2013 6:45 pm

I guess I don't know what a VIR eliminator is....
On my '75 project, I bought the parts for a '77, which is what the heater/AC system came out of.......

I'm in the dark on AC systems (so far)....

pila
Donating Member
Donating Member

Street Cred : 43

Back to top Go down

A/C VIR valve Empty Re: A/C VIR valve

Post by DoctorLarry Sat Aug 17, 2013 9:37 pm

If you have a 77 system it does not have a VIR. It should have a CCOT (Clutch Cycling Orifice Tube) system. The older cars regulated the flow of refrigerant through a Valves in Receiver (VIR) system. It has a series of valves that regulate the flow instead of an orifice tube and high and low pressure cutout switches. The VIR was prone to having the valves gum up and stick, then the system does not work right.

DoctorLarry
G3GM Member
G3GM Member

Street Cred : 3

Back to top Go down

A/C VIR valve Empty Re: A/C VIR valve

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum