looks like it's stock ?
3 posters
G3GM :: G3 Tech :: Engine & Driveline
Page 1 of 1
pila- Donating Member
- Street Cred : 43
Re: looks like it's stock ?
by 77mali Fri Mar 29, 2013 9:04 pm
Looks awesome!
That thing running yet? We want to see a video- put your son to work on that next time he's over helping you.
That thing running yet? We want to see a video- put your son to work on that next time he's over helping you.
77mali- Donating Member
- Street Cred : 62
Re: looks like it's stock ?
by pila Fri Mar 29, 2013 9:31 pm
I ran it last fall, for the cam break-in, @ 2200 RPM for around 35 minutes. Came out OK, and indicated 185 degrees temp, with a 180 thermostat. Fuel pressure was 4 PSI on the engine pump, and went to 7 PSI with the electric on. I'll need to set the electric down to about 6 PSI .
I cut the oil filter apart to inspect it after break-in, and found no metal etc in the element.
Selected the trans through all the gears etc to get oil circulated etc in there & check for leaks etc.
It has only exhaust pipes back to the cross-member on it, so it's REALLY loud !
I cut the oil filter apart to inspect it after break-in, and found no metal etc in the element.
Selected the trans through all the gears etc to get oil circulated etc in there & check for leaks etc.
It has only exhaust pipes back to the cross-member on it, so it's REALLY loud !
pila- Donating Member
- Street Cred : 43
jerry46765- Donating Member
- Street Cred : 20
G3GM :: G3 Tech :: Engine & Driveline
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|
» Roll Call and Car showcase
» Central Texas Noob
» Welcome Keith Seymore
» Wanted: Front park lamp assemblies
» 75 Hurst Olds T-tpos
» G3 Chevy rims- help ID these
» 75 el camino project.
» Have had a few questions
» vinyl top removal