advise needed
+5
2fat2fly
Brainstain
dynchel
77mali
Landonus
9 posters
G3GM :: G3 :: General Discussion
Page 1 of 1
advise needed
ok getting real close to getting a g3 again. right now looking at a 76 cutty, 77 buick regal and even a 76 or 77 century i know the olds engines are tough as nails.but dont have any real experience with 350 buicks. i'm not gonna post pics till im closer to getting or have one of them (bad luck for me when i post before i have lol). the advice i need id are the buickmotors any good? and also what car is (i'll use this term loosely) more "valuable" in terms of rarety
dragons_lair59- Donating Member
- Street Cred : 11
Re: advise needed
Show me the Buick, I've seen the Cutlass. If you want something rare I found the perfect G3 for you. I'll text you the link. If you ask me, I think Buicks are the rarest of the G3's. I see them the least.
Landonus- Donating Member
- Street Cred : 5
Re: advise needed
Buick Century/Regal's are not as common. Keep in mind that parts will also be harder to come by if you need them. In 1977 Cutlass was GM's top selling A body car & maybe 76 too.
IDK about Buick engines but I can tell you the Olds 350 motors are very good, having owned a 77 when I was young. Good luck Sam.
IDK about Buick engines but I can tell you the Olds 350 motors are very good, having owned a 77 when I was young. Good luck Sam.
77mali- Donating Member
- Street Cred : 62
Re: advise needed
When I was younger we had 2 '75 lesabers with 350 4bbl motors and a'77 regal with a 350 2bbl motor. I remember them all being pretty trouble free (though not fast at all). The regal could take a beating. As for what car to build I would say go with the Buick. The Cutlass was the best selling car of'77 so it will be more common. The problem with Buick motors is there is less aftermarket support for performance parts (if that's your thing)
dynchel- Donating Member
- Street Cred : 40
Re: advise needed
im not gonna build a hot rod just a have a nice clean cruising car. gas prices+ wife+3 kids= no hot rod lol and g3's are just the right size for my family and with the exception of my hot rod monte i had all my g3's have gotten about 20 mpg perfect for cruising too me lol
dragons_lair59- Donating Member
- Street Cred : 11
Re: advise needed
I have a soft spot for Regals. Definitely my favorite after the Malibu. If you pick a Lemans I know where 5-7 parts cars are, 1-2 Regals and a Cutlass or three are. Just gotta catch the guy at the right time..
Brainstain- Donating Member
- Street Cred : 8
Re: advise needed
Find one with a 455 in it, hot rod and no one will know it. My friend race a 70 GS with a 455,you cant believe what that thing is capable of. The torque broke the radiator support.
ant7377- G3GM Addict
- Street Cred : 36
Re: advise needed
ant7377 wrote:Find one with a 455 in it, hot rod and no one will know it. My friend race a 70 GS with a 455,you cant believe what that thing is capable of. The torque broke the radiator support.
you have no ideal of torque that can produced in a gegm car, just takes a little $$$
have you ever jumped into something that you just hope to hang onto, try jumping into 1300 plus hp with a 1400 plus torque rating under 6000 rpm, it''ll roll your soaks down, as always
2fat2fly- Donating Member
- Street Cred : 2
Re: advise needed
you guys are missing the not gonna hot rod it just getting it for cruising and a back up car with may be light dd duty. maybe at later date pick up a project for a hot rod/ street strip car
dragons_lair59- Donating Member
- Street Cred : 11
Re: advise needed
the buick 350 has always been a good motor in my experience ... i agree with it bein harder to find parts for the buicks but i vote for the buick
geoff528- G3GM Newbie
- Street Cred : 0
Re: advise needed
Wife liking regal its about the same color as our old Monte
dragons_lair59- Donating Member
- Street Cred : 11
Re: advise needed
2fat2fly wrote:ant7377 wrote:Find one with a 455 in it, hot rod and no one will know it. My friend race a 70 GS with a 455,you cant believe what that thing is capable of. The torque broke the radiator support.
you have no ideal of torque that can produced in a gegm car, just takes a little $$$
have you ever jumped into something that you just hope to hang onto, try jumping into 1300 plus hp with a 1400 plus torque rating under 6000 rpm, it''ll roll your soaks down, as always
Haha! I have plenty of an idea!
ant7377- G3GM Addict
- Street Cred : 36
Re: advise needed
I owned an '84 Regal Limited. ( I know..not a G3 ) Excellent car, but a 3.8 engine that couldn't get out of it's own dent in the road. Also had a '73 LeSabre with the 350, which was a nice engine for a family type car, but no power house for sure....
Current Buick is a park avenue..3.8 supercharged.. runs strong....
Never owned an Olds 350 powered car.
Current Buick is a park avenue..3.8 supercharged.. runs strong....
Never owned an Olds 350 powered car.
pila- Donating Member
- Street Cred : 43
Re: advise needed
I had a Olds 350 in my 98, it ran well way better than say a little newer one with a 307 but was still no power house.
ant7377- G3GM Addict
- Street Cred : 36
Similar topics
» Advise needed on brake upgrade.
» What would you do if you was me? I need some advise.
» Door glass advise
» What would you do if you was me? I need some advise.
» Door glass advise
G3GM :: G3 :: General Discussion
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Today at 12:58 pm by Keith Seymore
» Roll Call and Car showcase
Today at 10:20 am by g3chevy / Mr Pontiac
» Central Texas Noob
Today at 10:16 am by g3chevy / Mr Pontiac
» Welcome Keith Seymore
Today at 10:03 am by g3chevy / Mr Pontiac
» Wanted: Front park lamp assemblies
Today at 9:57 am by g3chevy / Mr Pontiac
» 75 Hurst Olds T-tpos
Today at 9:44 am by g3chevy / Mr Pontiac
» G3 Chevy rims- help ID these
Tue Oct 29, 2024 8:26 pm by Limey SE
» 75 el camino project.
Mon Oct 28, 2024 12:03 pm by zucchi
» Have had a few questions
Sun Oct 27, 2024 12:04 pm by Limey SE
» vinyl top removal
Sat Oct 26, 2024 11:30 pm by 76Chevelle2Tone