Advise needed on brake upgrade.
2 posters
G3GM :: G3 Tech :: Brake Upgrades
Page 1 of 1
Advise needed on brake upgrade.
by Hs1973 Fri Oct 16, 2020 12:31 pm
Hi guys. I notice today that my chevelle 1975 (aka wanda) is leaking from the back of the mastercylinder Down the brake booster. Im running a 9 inch booster and original remanufactured mastercylinder. The setup is 2 years old and im not happy with the performance or the fact that it is now leaking.
I would like to go back to a 11 inch booster and a new mastercylinder. But the stuff i have gotten last time was not the best quality
also i tried one time a wilwood mastercylinder, that turned out to be bad even brand new. So have anybody any experience with any brand or othervise that provided a good quality mastercylinder and a booster???
Im not to keen on buying the remanufactured stuff most dealers here in Copenhagen have on the shelf, i have to Many bad experiences with restored stuff. I dont mind if it is a little Pricey as long as i dont have to keep changing it every year. I can get any product here as long as i special order it, cardone, cpp, raybestos etc. But really have no experience in what to go for. Of course a Nice polished piece is attraktive, but if it dont work like its supposed to it is to expensive to send it back and get a new one ( because of our stupid tax laws) any advise is appriciated. Regards Henrik.
I would like to go back to a 11 inch booster and a new mastercylinder. But the stuff i have gotten last time was not the best quality
also i tried one time a wilwood mastercylinder, that turned out to be bad even brand new. So have anybody any experience with any brand or othervise that provided a good quality mastercylinder and a booster??? Im not to keen on buying the remanufactured stuff most dealers here in Copenhagen have on the shelf, i have to Many bad experiences with restored stuff. I dont mind if it is a little Pricey as long as i dont have to keep changing it every year. I can get any product here as long as i special order it, cardone, cpp, raybestos etc. But really have no experience in what to go for. Of course a Nice polished piece is attraktive, but if it dont work like its supposed to it is to expensive to send it back and get a new one ( because of our stupid tax laws) any advise is appriciated. Regards Henrik.
Hs1973- G3GM Enthusiast
- Street Cred : 14
Re: Advise needed on brake upgrade.
by g3chevy / Mr Pontiac Sun Oct 18, 2020 10:05 pm
Hs1973, this was talked about in another thread a couple of months back. I purchased a brand new master cylinder/ brake booster combo from CPP. Below is the link to that discussion and it has a couple of pics and a video link for more details. Hope this helps.
https://www.g3gm.com/t12683-1976-monte-brake-booster#117981
https://www.g3gm.com/t12683-1976-monte-brake-booster#117981
g3chevy / Mr Pontiac- Donating Member
- Street Cred : 35
pjbanman likes this post
Re: Advise needed on brake upgrade.
by Hs1973 Mon Oct 19, 2020 10:49 am
Cool thanks. I will read it trough. It is hard to find the best parts that dont go dead shorty after install. Regards henrik
Hs1973- G3GM Enthusiast
- Street Cred : 14
Similar topicsG3GM :: G3 Tech :: Brake Upgrades
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|
» Roll Call and Car showcase
» Central Texas Noob
» Welcome Keith Seymore
» Wanted: Front park lamp assemblies
» 75 Hurst Olds T-tpos
» G3 Chevy rims- help ID these
» 75 el camino project.
» Have had a few questions
» vinyl top removal