G3GM
Would you like to react to this message? Create an account in a few clicks or log in to continue.

G3GM 1973 to 1977 A-bodys. Chevelles, Monte Carlos, El Caminos, Laguna, 442, Cutlass, Malibu, GTO, LeMans, Century, Regal, Grand Am, Grand Prix, Sprint, Gran Sport, Can Am, Hurst-olds, and other 73-77 A-bodies


Glove Box lock

3 posters

G3GM :: G3 Tech :: Interior

Go down

Glove Box lock Empty Glove Box lock

Post by ant7377 Mon May 07, 2012 12:38 am

I want to swap it out of my cracked glove box door and into my not cracked glove box door. How does it come out? Nothing in the service manual or body manual.
ant7377
ant7377
G3GM Addict
G3GM Addict

Street Cred : 36

Back to top Go down

Glove Box lock Empty Re: Glove Box lock

Post by 77mali Mon May 07, 2012 6:34 am

http://thepontiactransampage.com/glovebox.html

It's not as easy as the page makes it look...LOL. Took me a few try's. There is also a nut on the back that you can remove & the whole assembly will come out, not just the cylinder. It's hard to get the right tool though because of the shape of the back of the lock assembly.
77mali
77mali
Donating Member
Donating Member

Street Cred : 62

Back to top Go down

Glove Box lock Empty Re: Glove Box lock

Post by ant7377 Mon May 07, 2012 7:57 am

You are like wealth of information ! I cant remember if the new one has a key though.
ant7377
ant7377
G3GM Addict
G3GM Addict

Street Cred : 36

Back to top Go down

Glove Box lock Empty Re: Glove Box lock

Post by 77mali Mon May 07, 2012 8:21 am

A locksmith can prob cut one for you if you get a blank. Sometimes the good hardware stores have them. Ive seen a "plumbers" socket at Sears, they are usually large diameters and have cut outs & they're cheap. You may have to modify the opening a bit to fit around the cylinder holder. If I didn't get it out how the web site said, that would have been the next step.
77mali
77mali
Donating Member
Donating Member

Street Cred : 62

Back to top Go down

Glove Box lock Empty Re: Glove Box lock

Post by ant7377 Thu May 10, 2012 7:25 am

I did this last night .I used a very small "Precision" Screw driver to push in the tab and it worked fine. Thanks Paul !
ant7377
ant7377
G3GM Addict
G3GM Addict

Street Cred : 36

Back to top Go down

Glove Box lock Empty Re: Glove Box lock

Post by 77mali Thu May 10, 2012 7:40 am

Anytime Anthony. Glad it worked out for you....did the tiny little slot guides fall out? I forgot to tell you about those.
77mali
77mali
Donating Member
Donating Member

Street Cred : 62

Back to top Go down

Glove Box lock Empty Re: Glove Box lock

Post by ant7377 Thu May 10, 2012 8:13 am

No nothing fell out and I had the key for the good cover so I was able to transfer over the original lock and use the original keys. I now know how a glove box lock works too.
ant7377
ant7377
G3GM Addict
G3GM Addict

Street Cred : 36

Back to top Go down

Glove Box lock Empty Re: Glove Box lock

Post by pila Wed May 30, 2012 12:59 pm

That's good info, I had no luck trying to figure that lock out... Very Happy

pila
Donating Member
Donating Member

Street Cred : 43

Back to top Go down

Glove Box lock Empty Re: Glove Box lock

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

G3GM :: G3 Tech :: Interior

 
Permissions in this forum:
You cannot reply to topics in this forum