What the heck is this?
4 posters
G3GM :: G3 Tech :: Engine & Driveline
Page 1 of 1
What the heck is this?
Does anyone know what the heck this plug thing is to the right of the distributor hole? It was not connected to anything when disassembling....
77mali- Donating Member
- Street Cred : 62
Re: What the heck is this?
looks like an idiot light and gauge set up odd or wrong sender and put the adapter in to make ine work and pluged the other with a sender either way odd
dragons_lair59- Donating Member
- Street Cred : 11
Re: What the heck is this?
Actually, most electric chokes are wired through an oil pressure switch, on the left-two terminals. Oil pressure sending unit is on the right, one terminal. Good luck, Ron
lagunainnewark- G3GM Member
- Street Cred : 8
Re: What the heck is this?
Maybe the last owner took it off...have a q-jet carb...I don't think it has electric choke but I don't know for sure will have to look into that. Thank you.
77mali- Donating Member
- Street Cred : 62
Re: What the heck is this?
lagunainnewark wrote:Actually, most electric chokes are wired through an oil pressure switch, on the left-two terminals. Oil pressure sending unit is on the right, one terminal. Good luck, Ron
Yup. Thats what thr plug next to the sensor is for. Maybe if I'm lucky, she'll run better w/ that connected to the carb? LOL. Thanks Ron.
77mali- Donating Member
- Street Cred : 62
Re: What the heck is this?
It's protects the choke coil and helps you to not run down the battery, key on engine off. If I can help, let me know, Ron.
lagunainnewark- G3GM Member
- Street Cred : 8
Re: What the heck is this?
lagunainnewark wrote:It's protects the choke coil and helps you to not run down the battery, key on engine off. If I can help, let me know, Ron.
If it's not too much of a pain in the A$$, can you post a pic of how it's conected on the carb side. I know it's prob. pretty simple but I am missing the whole unit. Thank you.
77mali- Donating Member
- Street Cred : 62
Re: What the heck is this?
Found this one...Edelbrock is making them :-) Wooh Hoo!
77mali- Donating Member
- Street Cred : 62
Re: What the heck is this?
looks like you've found the hard parts. The choke coil connector connects to one side of the oil pressure switch. Connect the other side to a fused, ignition switch feed. Your choke will only recieve power when the car is running, this way it won't run down the battery, key on engine off. Ron
lagunainnewark- G3GM Member
- Street Cred : 8
Re: What the heck is this?
I'm going to email Edelbrock...hopefully they have a tech sheet on it. My carb's ID# reflects that is was made in 1986...I may just go with a new carb set up and sell this one since I'm getting some new RHS vortec heads & a new air intake. I don't think this one is worth rebuilding...still thinking it through though. Don't know if going w/ new if I'll even bother ordering it w/ the electric choke or not...isn't the only benefit that it warms up the carb faster when used in conjunction with the old "cross over" style intakes? Vortec's don't even use that technology...so I'm thinking why bother?
77mali- Donating Member
- Street Cred : 62
Re: What the heck is this?
It's sometimes hard to picture what the end product will be, BUT if you can it WILL save you money. Match RPM ranges and parts as best you can. What model carb do you have? I have a dual quad intake I need 500 cfm's for, I have new, as far as I can tell 600's now. Try to plan it as best you can, planning saves money, at least till it's not fast enough. Ron
lagunainnewark- G3GM Member
- Street Cred : 8
Mystery Solved
Ok...Mystery solved. Oil pressure sending unit it is with back up power supply that connects to electric fuel pump for some strange reason. (At least when installed on trucks). Might still work for choke too.
77mali- Donating Member
- Street Cred : 62
Similar topics
» Anyone know what the heck this is?
» What the heck color is this Guna?
» 5 Hour Energy and Rusty Wallace can go to heck.
» What the heck color is this Guna?
» 5 Hour Energy and Rusty Wallace can go to heck.
G3GM :: G3 Tech :: Engine & Driveline
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Today at 12:58 pm by Keith Seymore
» Roll Call and Car showcase
Today at 10:20 am by g3chevy / Mr Pontiac
» Central Texas Noob
Today at 10:16 am by g3chevy / Mr Pontiac
» Welcome Keith Seymore
Today at 10:03 am by g3chevy / Mr Pontiac
» Wanted: Front park lamp assemblies
Today at 9:57 am by g3chevy / Mr Pontiac
» 75 Hurst Olds T-tpos
Today at 9:44 am by g3chevy / Mr Pontiac
» G3 Chevy rims- help ID these
Tue Oct 29, 2024 8:26 pm by Limey SE
» 75 el camino project.
Mon Oct 28, 2024 12:03 pm by zucchi
» Have had a few questions
Sun Oct 27, 2024 12:04 pm by Limey SE
» vinyl top removal
Sat Oct 26, 2024 11:30 pm by 76Chevelle2Tone