G3GM
Would you like to react to this message? Create an account in a few clicks or log in to continue.

G3GM 1973 to 1977 A-bodys. Chevelles, Monte Carlos, El Caminos, Laguna, 442, Cutlass, Malibu, GTO, LeMans, Century, Regal, Grand Am, Grand Prix, Sprint, Gran Sport, Can Am, Hurst-olds, and other 73-77 A-bodies


For the Budget minded dual cross member

4 posters

G3GM :: G3 Tech :: Engine & Driveline

Go down

For the Budget minded dual cross member Empty For the Budget minded dual cross member

Post by Limey SE Fri Jan 20, 2023 11:32 pm

For the Ones wanting Dual Exhaust, but a New One is not in the cards for you at this time, This shows How I made a Dual exhaust cross member from a factory single Exhaust one

EDIT: I KNOW THEY CAN BE BOUGHT THIS WAS SIMPLY TRYING TO HELP THE PERSON OUT THAT WOULD RATHER SPEND THE MONIES ON MOTOR UPGRADES FIRST


For the Budget minded dual cross member B776d310
For the Budget minded dual cross member 49afb910
For the Budget minded dual cross member Img_2037
For the Budget minded dual cross member Img_2038
For the Budget minded dual cross member 5dd99510

___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE
Limey SE
Management
Management

Street Cred : 98

jpowen49 likes this post

Back to top Go down

For the Budget minded dual cross member Empty Re: For the Budget minded dual cross member

Post by fasrnur Sun Jan 22, 2023 2:36 pm

[url=https://servimg.com/view/14350933/318]For the Budget minded dual cross member Dscf4013[//
My car has always been on a budget. So this is what I came up with. Cost me less than $10.
fasrnur
fasrnur
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 9

Limey SE likes this post

Back to top Go down

For the Budget minded dual cross member Empty Re: For the Budget minded dual cross member

Post by REVINKEVIN / Mr. 600+HP Sun Jan 22, 2023 6:38 pm

Guys, you know it’s things like this that made me stop going to Pro-Touring.com and just looking for ideas with you guys. On PT a guy would says, “I just bought a billet dual exhaust transmission crossover that I had coated with an unobtainiam resin. I paid $1,899 for it and I think I stole it!”

Here, we just make things. Great job to the both of you.
REVINKEVIN / Mr. 600+HP
REVINKEVIN / Mr. 600+HP
G3GM Senior Member
G3GM Senior Member

Street Cred : 20

Limey SE likes this post

Back to top Go down

For the Budget minded dual cross member Empty Re: For the Budget minded dual cross member

Post by Limey SE Sun Jan 22, 2023 10:18 pm

fasrnur wrote:[url=https://servimg.com/view/14350933/318]For the Budget minded dual cross member Dscf4013[//
My car has always been on a budget. So this is what I came up with. Cost me less than $10.


I need to get with you for the rear disc brake upgrade I got a new to me rear axle minus carrier and gears for very very cheep he was tired of looking at it and all the marketplace questions If it had a Posi and what gears.............
IT IS A BARE HOUSING WITH BOLT IN AXLES LOL

___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE
Limey SE
Management
Management

Street Cred : 98

Back to top Go down

For the Budget minded dual cross member Empty Re: For the Budget minded dual cross member

Post by bracketchev1221 Mon Jan 23, 2023 9:11 am

That was how we did the 78-81 malibu crossmembers before the aftermarket ones became available. Did mine in 1996 like that.
bracketchev1221
bracketchev1221
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 16

Back to top Go down

For the Budget minded dual cross member Empty Re: For the Budget minded dual cross member

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

G3GM :: G3 Tech :: Engine & Driveline

 
Permissions in this forum:
You cannot reply to topics in this forum