G3GM
Would you like to react to this message? Create an account in a few clicks or log in to continue.

G3GM 1973 to 1977 A-bodys. Chevelles, Monte Carlos, El Caminos, Laguna, 442, Cutlass, Malibu, GTO, LeMans, Century, Regal, Grand Am, Grand Prix, Sprint, Gran Sport, Can Am, Hurst-olds, and other 73-77 A-bodies


Steering wheel install

2 posters

G3GM :: G3 Tech :: Interior

Go down

Steering wheel install Empty Steering wheel install

Post by ant7377 Fri Mar 12, 2021 6:23 pm

I'm trying to put my stock steering wheel back on after replacing the little spring for turn signal switch. Is there a trick to this or do I just crank on the big nut in the middle to get it to seat? It's only got to go probably 1/8 more maybe less. Thanks Thumbs up
ant7377
ant7377
G3GM Addict
G3GM Addict

Street Cred : 36

Back to top Go down

Steering wheel install Empty Re: Steering wheel install

Post by g3chevy / Mr Pontiac Sat Mar 13, 2021 12:35 am

Did you remove the lock plate to get to the turn signal switch? I've had an issues recently with the turn signal cancelling cam being a slightly different design that kept the lock plate from compressing down far enough to seat the lock ring in place.
g3chevy / Mr Pontiac
g3chevy / Mr Pontiac
Donating Member
Donating Member

Street Cred : 35

Back to top Go down

Steering wheel install Empty Re: Steering wheel install

Post by ant7377 Sat Mar 13, 2021 9:47 am

g3chevy wrote:Did you remove the lock plate to get to the turn signal switch? I've had an issues recently with the turn signal cancelling cam being a slightly different design that kept the lock plate from compressing down far enough to seat the lock ring in place.


Yup. I did but that is all back together and good. I just don't want to damage the column by using too much force on it,since it is a collapsible column and a bearing or something can be damaged.
ant7377
ant7377
G3GM Addict
G3GM Addict

Street Cred : 36

Back to top Go down

Steering wheel install Empty Re: Steering wheel install

Post by g3chevy / Mr Pontiac Sat Mar 13, 2021 2:22 pm

You can pull the steering wheel into position by tightening the securing nut which I think is 3/4"? Factory GM manual says to torque steering wheel securing nut to 30 ft lbs. Hope this helps.
g3chevy / Mr Pontiac
g3chevy / Mr Pontiac
Donating Member
Donating Member

Street Cred : 35

Back to top Go down

Steering wheel install Empty Re: Steering wheel install

Post by ant7377 Sat Mar 13, 2021 2:28 pm

g3chevy wrote:You can pull the steering wheel into position by tightening the securing nut which I think is 3/4"? Factory GM manual says to torque steering wheel securing nut to 30 ft lbs. Hope this helps.

Ok great. Thank you.
ant7377
ant7377
G3GM Addict
G3GM Addict

Street Cred : 36

Back to top Go down

Steering wheel install Empty Re: Steering wheel install

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

G3GM :: G3 Tech :: Interior

 
Permissions in this forum:
You cannot reply to topics in this forum