G3GM
Would you like to react to this message? Create an account in a few clicks or log in to continue.

G3GM 1973 to 1977 A-bodys. Chevelles, Monte Carlos, El Caminos, Laguna, 442, Cutlass, Malibu, GTO, LeMans, Century, Regal, Grand Am, Grand Prix, Sprint, Gran Sport, Can Am, Hurst-olds, and other 73-77 A-bodies


JACKPOT!!! Found my build sheet!!!! Now need a little help....

4 posters

G3GM :: G3 :: General Discussion

Go down

JACKPOT!!! Found my build sheet!!!! Now need a little help.... Empty JACKPOT!!! Found my build sheet!!!! Now need a little help....

Post by FumiyoG3 Sat Aug 18, 2018 10:39 pm

I'm fired up that I found the build sheet for my '73 Laguna on top of the gas tank.  Thumbs up  It's in pretty good condition.  It came right off the tank- it was stuck on with a piece of masking tape! I'm a little scared about trying to clean it up.  Anyone have any suggestions??

JACKPOT!!! Found my build sheet!!!! Now need a little help.... Builds10
FumiyoG3
FumiyoG3
G3GM Member
G3GM Member

Street Cred : 2

Back to top Go down

JACKPOT!!! Found my build sheet!!!! Now need a little help.... Empty Re: JACKPOT!!! Found my build sheet!!!! Now need a little help....

Post by Mcarlo77 Sat Aug 18, 2018 11:20 pm

Congrats!

I don't think you dare try to do anything but a light swipe with a damp cloth...and, not even sure I'd do that and risk ruining it.  If that one is like the ones I've found on top of gas tanks, it's very brittle...so, be careful.  I'd certainly make copies of it and then store it in a clear vinyl protective sleeve.
Mcarlo77
Mcarlo77
Donating Member
Donating Member

Street Cred : 78

Back to top Go down

JACKPOT!!! Found my build sheet!!!! Now need a little help.... Empty Re: JACKPOT!!! Found my build sheet!!!! Now need a little help....

Post by FumiyoG3 Sun Aug 19, 2018 10:56 pm

I cleaned it up with light brushing from a small paintbrush. It turned out nicely- now I can see my favorite option code- CA1 sunroof!!!!

It is wrinkled up in the top left corner. I wonder how i could possibly get those out without tearing the sheet to bits.............JACKPOT!!! Found my build sheet!!!! Now need a little help.... Builds11
FumiyoG3
FumiyoG3
G3GM Member
G3GM Member

Street Cred : 2

Back to top Go down

JACKPOT!!! Found my build sheet!!!! Now need a little help.... Empty Re: JACKPOT!!! Found my build sheet!!!! Now need a little help....

Post by impalamonte Mon Aug 20, 2018 9:20 am

For your wrinkles....potentially steam (?). Not that I am an authority. Just a possible solution . Just lending a thought.

Anyone else ?
impalamonte
impalamonte
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 18

Back to top Go down

JACKPOT!!! Found my build sheet!!!! Now need a little help.... Empty Re: JACKPOT!!! Found my build sheet!!!! Now need a little help....

Post by Keith Seymore Tue Aug 21, 2018 11:34 am

These guys have done some aggressive sounding things with laquer thinner, but with good results:

http://forums.maxperformanceinc.com/forums/showthread.php?t=777277&highlight=build+sheet

http://www.forums.maxperformanceinc.com/forums/showthread.php?t=383828

http://forums.maxperformanceinc.com/forums/showthread.php?t=482512&highlight=%22laquer+build%22&page=2
Keith Seymore
Keith Seymore
G3GM Member
G3GM Member

Street Cred : 11

Back to top Go down

JACKPOT!!! Found my build sheet!!!! Now need a little help.... Empty Re: JACKPOT!!! Found my build sheet!!!! Now need a little help....

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

G3GM :: G3 :: General Discussion

 
Permissions in this forum:
You cannot reply to topics in this forum