G3GM
Would you like to react to this message? Create an account in a few clicks or log in to continue.

G3GM 1973 to 1977 A-bodys. Chevelles, Monte Carlos, El Caminos, Laguna, 442, Cutlass, Malibu, GTO, LeMans, Century, Regal, Grand Am, Grand Prix, Sprint, Gran Sport, Can Am, Hurst-olds, and other 73-77 A-bodies


Tie Rod Question

2 posters

G3GM :: G3 Tech :: Chassis and Suspension

Go down

Tie Rod Question Empty Tie Rod Question

Post by REVINKEVIN / Mr. 600+HP Sun Aug 12, 2018 10:28 pm

Hey. I am searching the Moog web site for inner and outer tie rods. They only list one part number. The Problem Solver ES2020RLT. I looked on Rock Auto and other brands have a different part number but Moog only show this one and it is listed as an inner. What am I missing??? Thanks.

BTW, 1976 Chevrolet Laguna S3
REVINKEVIN / Mr. 600+HP
REVINKEVIN / Mr. 600+HP
G3GM Senior Member
G3GM Senior Member

Street Cred : 20

Back to top Go down

Tie Rod Question Empty Re: Tie Rod Question

Post by Iguy Mon Aug 13, 2018 8:40 am

Yeah I struggled with the same thing, I used Inner ES2020RLT and Outer ES427R, also ES2004S sleeves. They all matched up perfect to stock. This was on a 75 but I'm pretty sure 76 is the same for steering components.
Iguy
Iguy
G3GM Member
G3GM Member

Street Cred : 3

Back to top Go down

Tie Rod Question Empty Re: Tie Rod Question

Post by REVINKEVIN / Mr. 600+HP Mon Aug 13, 2018 10:31 am

I do like the 427 part number. Thanks for the info.
REVINKEVIN / Mr. 600+HP
REVINKEVIN / Mr. 600+HP
G3GM Senior Member
G3GM Senior Member

Street Cred : 20

Back to top Go down

Tie Rod Question Empty Re: Tie Rod Question

Post by REVINKEVIN / Mr. 600+HP Mon Aug 13, 2018 7:27 pm

I talked with Moog direct today and they don't show one that fits. I bought the 427R like you got. I am going to work on this a little tonight and check the fit. Thanks again.
REVINKEVIN / Mr. 600+HP
REVINKEVIN / Mr. 600+HP
G3GM Senior Member
G3GM Senior Member

Street Cred : 20

Back to top Go down

Tie Rod Question Empty Re: Tie Rod Question

Post by Iguy Fri Aug 17, 2018 8:25 am

Yeah MOOG's website is strange, they have a lot of parts listed for 73-77 El Caminos but not Malibus, etc, or sometimes listed for Chevelle but not Malibu. I spent way too much time figuring out what fits and finally ran across info on some other website. When I built the parts I matched them up side by side with the stock stuff and it was exactly the same. No problems with alignment or driving. The hardest part was I had one inner tie rod was a bitch to get out of the center link. It's always that one bolt that takes forever it seems... Good luck!
Iguy
Iguy
G3GM Member
G3GM Member

Street Cred : 3

Back to top Go down

Tie Rod Question Empty Re: Tie Rod Question

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

G3GM :: G3 Tech :: Chassis and Suspension

 
Permissions in this forum:
You cannot reply to topics in this forum