G3GM
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Looking for Gauges for 77 Monte Carlo

4 posters

Go down

Looking for Gauges for 77 Monte Carlo Empty Looking for Gauges for 77 Monte Carlo

Post by Circuit Rider Sat Apr 15, 2017 12:13 am

Hi!  New to the forum.  Working  on a 77 Monte. PO put in Auto Meter Speedometer and Tack in center of cluster. However, no fuel level, oil pressure , water temp or voltage meter.  Can anybody out there help?  Willing to go aftermarket it need be.  Any info will help thanks.  Andy
Circuit Rider
Circuit Rider
G3GM Newbie
G3GM Newbie

Street Cred : 0

Back to top Go down

Looking for Gauges for 77 Monte Carlo Empty Re: Looking for Gauges for 77 Monte Carlo

Post by Mcarlo77 Sat Apr 15, 2017 10:28 am

It's going to be a challenge to find those small gauges without buying the entire gauge cluster.  And, even those have become scarce...and, pricey.  Clusters with the Fuel Economizer gauge ('75-'77) instead of the tach are cheaper and will have these gauges...but, they still bring over $100 if you can find one.  On the other hand, finding/buying (4) original individual gauges are going to cost all of that, anyway.  Be advised, the flex circuit on the back of your instrument cluster is different than what is used on clusters with gauges.
Mcarlo77
Mcarlo77
Donating Member
Donating Member

Street Cred : 78

Back to top Go down

Looking for Gauges for 77 Monte Carlo Empty Re: Looking for Gauges for 77 Monte Carlo

Post by Joe73 Sat Apr 15, 2017 12:15 pm

Andy, is your flex circuit board for gauges or lights??
Joe73
Joe73
Donating Member
Donating Member

Street Cred : 83

Back to top Go down

Looking for Gauges for 77 Monte Carlo Empty 1977-1977 gauge Cluster

Post by Mitchell Murphy Wed Apr 19, 2017 5:32 pm

I will be taking my cluster out in my 1975 Laguna Type S-3 at a later date should you not find one- all of mine work as they should and includes the Rare tachometer. The reason that I am taking it out is because I have a MINT one that I will be putting in, the one in it has some rust spots on the face, but works fine. I had rather have it as is than No gauge package. If you think you might be interested, I will give you first refusal when I pull it out-Thanks Mitch

Mitchell Murphy
G3GM Member
G3GM Member

Street Cred : 7

Back to top Go down

Looking for Gauges for 77 Monte Carlo Empty Re: Looking for Gauges for 77 Monte Carlo

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum