Dash Cap Suggestions

by Hawk03 Fri Dec 23, 2016 9:22 am

My dash is in need of some serious help and I think the dash cap would help it out. I'd really like to use Just Dashes but don't want the down time and I'm not ready to shell out that much cash yet. I know a dash cap is not the best and some have issues so I'd like to see who has purchased the best one and from where. From other threads I have read, Coverly caps are not that good. They do not cover the the dash all the way to the vents or defrost vents.

How is the quality from OPGI, Eckler's or 1Aauto? Any other experiences good or bad from a vendor?

Bitterfinger's cap looks good but I'm not sure where he purchased his from. The other two pics below are a little short covering the entire dash.

Bitterfinger
Dash Cap Suggestions Img_2010

http://www.g3gm.com/t10058p25-1974-malibu-project-timeline

1974malibu383
Dash Cap Suggestions Img_2310

eBay listing
Dash Cap Suggestions Dash10

by pila Fri Dec 23, 2016 12:11 pm

I understand your problem !! I don't remember where mine came from, but my Malibu & El Camino bot have caps. They don't
has a as big a space around the vent openings as your pics though. It's too bad they aren't made to be trimmed to fit around the vents.
I painted the area where the openings show around the vents, which is the best I could do with them...
This one is my '74 Malibu, and the Elco is identical..

Dash Cap Suggestions P1011348_zpsnl7nhnld

Dash Cap Suggestions P1011348_zpsnl7nhnld

by Damon23 Fri Dec 23, 2016 4:14 pm

I thought they were all the same just branded different. One thing I learned from using a cap on my 79 Z28 was to cut down the cracks, clean and paint around all the vents with the same paint you use on the cap if you paint it. I did that on my Z28 and it came out really nice.

by pila Fri Dec 23, 2016 7:27 pm

X2 on painting the dash surfaces around vent openings, which is what I did.....same color as original anyway..
If I wanted a custom dash, I would do it myself, with Stewart Warner gauges...

by Hawk03 Fri Dec 30, 2016 2:00 pm

Thanks guys. Painting the dash prior to installing the cap is a good idea.

What is the the factory grain pattern? Madrid or Sierra grain? I'm thinking that wrapping the dash cap in vinyl would allow for a better finish.

by pila Fri Dec 30, 2016 8:34 pm

What I don't like about mine, is that the paint is too glossy. I'll likely get one ( or two) of the carpet covers to put on the top(S) I see that NPD has them..

by Damon23 Sat Dec 31, 2016 10:37 am

I used the SEM low luster clear to knock down the shine from the paint. I used that on all the parts I did and it turned out real nice. So many people commented on how well the interior held up. They were shocked when I told them what I did. Dash is a cap, console was done, lower dash with vents done and the steering wheel was done. All SEM paint and low luster clear with bullydog adhesion promoter.
Dash Cap Suggestions Cam8

by Sponsored content

Dash Cap Suggestions

Dash Cap Suggestions

Re: Dash Cap Suggestions

Re: Dash Cap Suggestions

Re: Dash Cap Suggestions

Re: Dash Cap Suggestions

Re: Dash Cap Suggestions

Re: Dash Cap Suggestions

Re: Dash Cap Suggestions