G3GM
Would you like to react to this message? Create an account in a few clicks or log in to continue.

G3GM 1973 to 1977 A-bodys. Chevelles, Monte Carlos, El Caminos, Laguna, 442, Cutlass, Malibu, GTO, LeMans, Century, Regal, Grand Am, Grand Prix, Sprint, Gran Sport, Can Am, Hurst-olds, and other 73-77 A-bodies


Tail panel sheet metal

3 posters

G3GM :: G3 :: General Discussion

Go down

Tail panel sheet metal Empty Tail panel sheet metal

Post by marx3 Tue Aug 09, 2016 11:32 am

Does anyone know if the tail panel is the same from 73 to 77?
I am wondering if it is possible to put a complete 74 rear end on a 77 car.
Tail lights, center piece and trunk lid.

I know 76-77 has a different trunk lid with a cut out for the license plate
marx3
marx3
Donating Member
Donating Member

Street Cred : 1

Back to top Go down

Tail panel sheet metal Empty Re: Tail panel sheet metal

Post by Joe73 Tue Aug 09, 2016 11:43 am

73 is a one year only tail panel

73 and 74 have similar trunk lids but I have not matched them side by side. I've heard that 74 is slightly different than 73 but I would find that hard to believe.

If you have the complete rear from a 74 and cut it in the right place, I dont see why you couldnt graft it on.
Joe73
Joe73
Donating Member
Donating Member

Street Cred : 83

Back to top Go down

Tail panel sheet metal Empty Re: Tail panel sheet metal

Post by marx3 Tue Aug 09, 2016 12:28 pm

The whole 73 rear end is obviously it's own. Not much comparison to 74-75 and 76-77.
I am not talking about welding in the whole inner structure, I meant swapping the tail lights, center panel/license plate area and the trunk lid.
If the body is the same between 74 and 77, then it would be a bolt on deal to give a 77 car the 74 look.
marx3
marx3
Donating Member
Donating Member

Street Cred : 1

Back to top Go down

Tail panel sheet metal Empty Re: Tail panel sheet metal

Post by Limey SE Tue Aug 09, 2016 2:30 pm

73 - 74 Outer trunk Lids are same dimension only Difference is where the Latch hits the Body, Outer Shell is Same, 74 Tail is different Dimensions than a 75-77 and It could be Butt welded in but you have to change Trunk lid and where it latchs to a 74 trunk They will never line up if you don't. I am not saying it can't be done it Can with alot of Fabrication.....
One suggestion is to Find a 74 Tail panel where lights go Thru through and Mark the outline on the 76 77 Tail Section Cut that part out of the 76 77 Panel make sure everything is Squared up, Then Fill in the 76 77 section that you didnt cut out with metal Smooth sand paint

___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE
Limey SE
Management
Management

Street Cred : 98

Back to top Go down

Tail panel sheet metal Empty Re: Tail panel sheet metal

Post by marx3 Tue Aug 09, 2016 3:04 pm

Dang, I feared there the latch would be different.
Alright, thanks for the info
marx3
marx3
Donating Member
Donating Member

Street Cred : 1

Back to top Go down

Tail panel sheet metal Empty Re: Tail panel sheet metal

Post by Limey SE Tue Aug 09, 2016 3:33 pm

marx3 wrote:Dang, I feared there the latch would be different.
Alright, thanks for the info

Another way is to Find a 74 Body and to transfer the quad lights to it instead of Single if thats what you Like Would alot easier than Tail panel switch

___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE
Limey SE
Management
Management

Street Cred : 98

Back to top Go down

Tail panel sheet metal Empty Re: Tail panel sheet metal

Post by marx3 Sat Aug 13, 2016 2:17 am

I wish I had a 1974, since I love the round headlights and the 74 rear looks the best I think.
I guess I will have to decide between the 75 and 77 tail lights.
Or will the 74 tail lights and center panel go on a 75? I guess it actually will, huh?
marx3
marx3
Donating Member
Donating Member

Street Cred : 1

Back to top Go down

Tail panel sheet metal Empty Re: Tail panel sheet metal

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

G3GM :: G3 :: General Discussion

 
Permissions in this forum:
You cannot reply to topics in this forum