700R4 swap with a floor shift
4 posters
G3GM :: G3 :: General Discussion
Page 1 of 1
700R4 swap with a floor shift
Hello all, I am doing so research on putting a 700R4 in my 76 Malibu. It will have factory bucket seats and console with floor shift. Has anyone got the factory shifter to work with all four postions in the manual low?
Or has anyone put a aftermarket shifter into the factory console and made it look good? I would like to be able to pull the 700R4 into low gear and wind it up to the shift points and feel the shift kit.
Love to hear what other people have done when putting overdrive transmissions in their car. Thanks
Mike
Or has anyone put a aftermarket shifter into the factory console and made it look good? I would like to be able to pull the 700R4 into low gear and wind it up to the shift points and feel the shift kit.
Love to hear what other people have done when putting overdrive transmissions in their car. Thanks
Mike
thert1976- G3GM Newbie
- Street Cred : 0
Re: 700R4 swap with a floor shift
I know guys who have done it with a column mounted shifter and all gears work as they should, even on the indicator. I'm not sure about floor shifters but the guys purchased their shifter indicators and metal tab (forgot what its really called) that gives the sifter the extra gear, all from this site.
http://www.shiftworks.com/
http://www.shiftworks.com/
Joe73- Donating Member
- Street Cred : 83
Re: 700R4 swap with a floor shift
I actually think that link should be a sticky for you auto guys.
Joe73- Donating Member
- Street Cred : 83
Re: 700R4 swap with a floor shift
I watched a car show and saw them doing the 700 swap to a 72 Chevelle from a turbo 400. They had a bolt on retrofit kit to switch the factory shifter making it into a 4 position unit and they offered a indicator plate also.
Sorry I cant remember what show or the company that sold the kit.
Sorry I cant remember what show or the company that sold the kit.
SSTOOLMAN- Donating Member
- Street Cred : 7
Re: 700R4 swap with a floor shift
I just looked on the shiftworks site and if you look at the 68-75 GTO shifter, then scroll to the bottom of the page, I believe that is the shifter used in 73-77 Chevelles.
fasrnur- G3GM Enthusiast
- Street Cred : 9
Similar topics
» Converting 77' bench to console and floor shift brackets
» TH350 to 700R4 swap questions
» 700r4 help
» TH350 to 700R4 swap questions
» 700r4 help
G3GM :: G3 :: General Discussion
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Thu Jan 23, 2025 2:19 pm by Finn Monte
» chevelle exhaust pipes (stock)
Wed Jan 22, 2025 3:34 pm by 76Chevelle2Tone
» Life & Back On The Radio
Mon Jan 20, 2025 3:36 pm by knightfan26917
» 74 Elcamino project
Sat Jan 18, 2025 5:09 pm by gman
» 1973 Chevelle Parts For Sale - Steering Wheel and Column
Fri Jan 17, 2025 7:58 pm by 76 Malibu
» Stroh's Fabrication Bucket Seat/Console Brackets - Review
Fri Jan 17, 2025 7:57 pm by 76 Malibu
» Dual exhaust for 75 fourdoor
Wed Jan 15, 2025 7:17 pm by ag_eet
» 1973 Chevelle SS shifter knob
Wed Jan 15, 2025 9:19 am by Mitchell Murphy
» Grand Lemans - SoCal - $800
Tue Jan 14, 2025 11:34 pm by g3chevy / Mr Pontiac
» G3GM Decals/stickers Now Available for purchase.
Sun Jan 12, 2025 5:07 pm by Limey SE