Free to those that will use them
+7
Dinomyte
Mcarlo77
JKK
74laguna
Biomedtech
77ElClassic
JiMi_DRiX
11 posters
G3GM :: Classifieds :: Freebie Section
Page 1 of 1
Free to those that will use them
Did a little treasure hunting in the attic to see what parts I had stuck in there over the years. I found a few items that may help someone out. I don't want anything for them other than they get put to good use.
1 set of hood hinges, came off a 75 Elco.
1 wiper moter, 75 Elco.
1 set sunvisors with hinges, 77 Elco (no bushings though)
1 small dome light from over the rear-view mirror, 75 Elco
Full set of bed trim from a 75 Elco. Not bad, but not great.
1 outer grill trim off a 77 Elco. Rock pock just right of center but not to bad to repair.
2 sets of front turn signal lenses. Ones a 75 & the others a 77. One of the lenses has a small bullseye, but I don't know which year set it is.
Full set (I think) of the trim that runs the full length of both sides along the very bottom. 77 Elco
Shift linkage for column shifter, 75 Elco
I also found a set of aluminum sbc valve covers that resemble the old M/T valve covers that were popular in the 70s. They have Camaro embossed in them though. Some genius must have tried to drill a hole for PCV or something and made the hole WAAAAY to big for anything, and made the hole ugly to boot. Anyone with tools for aluminum may be able to make repairs though.
I'll post pics if asked.
1 set of hood hinges, came off a 75 Elco.
1 wiper moter, 75 Elco.
1 set sunvisors with hinges, 77 Elco (no bushings though)
1 small dome light from over the rear-view mirror, 75 Elco
Full set of bed trim from a 75 Elco. Not bad, but not great.
1 outer grill trim off a 77 Elco. Rock pock just right of center but not to bad to repair.
2 sets of front turn signal lenses. Ones a 75 & the others a 77. One of the lenses has a small bullseye, but I don't know which year set it is.
Full set (I think) of the trim that runs the full length of both sides along the very bottom. 77 Elco
Shift linkage for column shifter, 75 Elco
I also found a set of aluminum sbc valve covers that resemble the old M/T valve covers that were popular in the 70s. They have Camaro embossed in them though. Some genius must have tried to drill a hole for PCV or something and made the hole WAAAAY to big for anything, and made the hole ugly to boot. Anyone with tools for aluminum may be able to make repairs though.
I'll post pics if asked.
77ElClassic- Donating Member
- Street Cred : 5
Re: Free to those that will use them
Are the hood hinges still sturdy? And the same as the Monte?
JiMi_DRiX- G3GM Enthusiast
- Street Cred : 3
Re: Free to those that will use them
do you have tail gate upper trim?
74laguna- G3GM Member
- Street Cred : 0
Re: Free to those that will use them
Hood hinges are the same for Monte/Chevelle/El Camino/Cutlass/Sprint.
Mcarlo77- Donating Member
- Street Cred : 78
Re: Free to those that will use them
If you think the hinges are still in good working order I would be interested in those!
JiMi_DRiX- G3GM Enthusiast
- Street Cred : 3
Re: Free to those that will use them
As far as the hinges - I know they worked fine when I stripped the Elco I got them from. I've had them 10 years or better, but they've been stored well.
I believe do have the tailgate trim, but if I remember correctly it was the original off my Elco and has a ding in it somewhere. I'll get up there this week and double-check.
I believe do have the tailgate trim, but if I remember correctly it was the original off my Elco and has a ding in it somewhere. I'll get up there this week and double-check.
77ElClassic- Donating Member
- Street Cred : 5
Re: Free to those that will use them
74laguna wrote:do you have tail gate upper trim?
I found the tailgate trim. I does have a couple dings but I think they could be worked. I'll send pics if you want them.
77ElClassic- Donating Member
- Street Cred : 5
Re: Free to those that will use them
Just let me know and I'd be happy to take them off your hands! Ill cover shipping if needed.
JiMi_DRiX- G3GM Enthusiast
- Street Cred : 3
Re: Free to those that will use them
77ElClassic wrote:74laguna wrote:do you have tail gate upper trim?
I found the tailgate trim. I does have a couple dings but I think they could be worked. I'll send pics if you want them.
pictures would be great
74laguna- G3GM Member
- Street Cred : 0
Re: Free to those that will use them
Not an easy item to get a picture of.
[img][/img]
[img][/img]
[img][/img]
[img][/img]
[img][/img]
[img][/img]
77ElClassic- Donating Member
- Street Cred : 5
Re: Free to those that will use them
Interested in the wiper motor. PM sent
Biomedtech- G3GM Member
- Street Cred : 5
Re: Free to those that will use them
looks about the same as the one on the car/truck now thanks for posting
74laguna- G3GM Member
- Street Cred : 0
Re: Free to those that will use them
i´m in line for the dome light, outer grill trim, hood hinges and 75 park lenses!! this makes my camino closer to the road! Â
JKK- G3GM Newbie
- Street Cred : 0
Re: Free to those that will use them
Best try and PM 77ElClassic. He hasn't visited this site in over a year.
Mcarlo77- Donating Member
- Street Cred : 78
Re: Free to those that will use them
77ElClassic wrote:
Full set (I think) of the trim that runs the full length of both sides along the very bottom. 77 Elco
I'll post pics if asked.
I'd be interested in these, very interested, I've been looking for a long time. Would you post a pic please & thanks.
Dinomyte- Donating Member
- Street Cred : 11
Re: Free to those that will use them
I'ld be intrested in the bed trim and the grill trim, if its still available.
Rt66Cruzer- G3GM Newbie
- Street Cred : 0
75 el camino
Anything left for a 75 el camino I would be very interested in, thank you.
Itsa75- G3GM Newbie
- Street Cred : 0
Re: Free to those that will use them
I'd be happy to pay shipping for the sun visors. Â Missing both on my 77. Wow didn't realize how old this was sorry
braunicus- G3GM Newbie
- Street Cred : 0
Re: Free to those that will use them
I know you have had this post out there for a while but you said you had a full set of lower chrome that ran from front to back on the lower portion of the doors and body. Do you still have those?
Medic1811- G3GM Newbie
- Street Cred : 0
G3GM :: Classifieds :: Freebie Section
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Yesterday at 12:58 pm by Keith Seymore
» Roll Call and Car showcase
Yesterday at 10:20 am by g3chevy / Mr Pontiac
» Central Texas Noob
Yesterday at 10:16 am by g3chevy / Mr Pontiac
» Welcome Keith Seymore
Yesterday at 10:03 am by g3chevy / Mr Pontiac
» Wanted: Front park lamp assemblies
Yesterday at 9:57 am by g3chevy / Mr Pontiac
» 75 Hurst Olds T-tpos
Yesterday at 9:44 am by g3chevy / Mr Pontiac
» G3 Chevy rims- help ID these
Tue Oct 29, 2024 8:26 pm by Limey SE
» 75 el camino project.
Mon Oct 28, 2024 12:03 pm by zucchi
» Have had a few questions
Sun Oct 27, 2024 12:04 pm by Limey SE
» vinyl top removal
Sat Oct 26, 2024 11:30 pm by 76Chevelle2Tone