Radiators
+3
Mcarlo77
JB2wheeler
1973 454 MONTE
7 posters
G3GM :: G3 Tech :: Engine & Driveline
Page 1 of 1
Radiators
I think im gonna need a Radiator in my 77 Monte. Im not in a rush so I can do my research.What are you guys using ?Im thinking an Aluminum Summit part # 380457 .Ive got this big 4 row in there now but I have not found another.I bought it off a guy where else could this have come from ? (Pick up maybe) Id like to get another. Maybe I will try to get this one reapaired, they arent cheap at all anymore.
ant7377- G3GM Addict
- Street Cred : 36
Re: Radiators
I bought a 4 row copper radiator about 4 years ago and have had no heating problems at all. I am running about 550 HP. I bought mine thru my local speed shop. Summit or Jegs can probably get you one. They are a lot cheaper than aluminum, at least they used to be. JB
JB2wheeler- G3GM Fanatic
- Street Cred : 28
Re: Radiators
I think mine is a 3 core copper not sure it's original to the car. Pic is before cleaning up but I might also be upgrading too. I've seen aftermarket "stock" replacements out there on a few sites. If you're interested I can dig through my notes.
77mali- Donating Member
- Street Cred : 62
Re: Radiators
My '77 has the original V01 option HD Radiator. Not sure if this meant it was a 4-core. Never really paid attention to it...even though years ago I took it out to have it repaired.
Mcarlo77- Donating Member
- Street Cred : 78
Re: Radiators
alumitech reproductions, are great
http://www.chevellecooling.com/
http://www.chevellecooling.com/
___________________________________________
www.cardomain.com/id/3115ultima
BlackChevelleSS- Management
- Street Cred : 20
Re: Radiators
I checked on autozone and advanced auto parts webssites and they dont seem to sell radiators for these cars anymore. I might just get mine recored but keep the suggestions coming.
ant7377- G3GM Addict
- Street Cred : 36
Re: Radiators
My advice...go have it recored. These radiators are well-built and good candidates for recoring...unlike the lightweight crap they put in cars nowdays.
Mcarlo77- Donating Member
- Street Cred : 78
Re: Radiators
I heard a rumor (online) that Autozone not only has them, but in their catalog they mispriced them at $130 when the actual price was $300. I do not know if this is true. Its worth checking on. JB
JB2wheeler- G3GM Fanatic
- Street Cred : 28
Re: Radiators
I found both a copper (pt#CU360 @ $109) and aluminum (pt# CU161 @ $113) on the Autozone site for a '77 Monte 350-4bbl. Doesn't say how many cores, but I'm guessing 3 as another company I've bought radiators from lists a part number of CR161 for a 3-core.
Mcarlo77- Donating Member
- Street Cred : 78
Re: Radiators
For my '75 Elco I bought a Champion off of Ebay, a 3-row aluminum, for $229 shipped. I went to aluminum for the weight savings, because of the heavier engine. It's a big radiator, and it just fit in the core support. A friend put a Griffin in his '68 GTO. It was expensive, and didn't appear to be any better than the Champion.
Can't beat a copper radiator for a stock/original look though.
Can't beat a copper radiator for a stock/original look though.
pila- Donating Member
- Street Cred : 43
Re: Radiators
only problem with the aluminum radiators they use in the newer cars is the plastic tanks, I see alot of blown up motors from leaky plastic radiator tanks or plastic coolant lines
By the way im I know the 72 chevelle radiator will fit the 73 perfect. im pretty sure 69-72 radiators will fit most 73-77s as long as the radiator has the heater hose fitting on it which the 72s had. but I would measure your rad first.
By the way im I know the 72 chevelle radiator will fit the 73 perfect. im pretty sure 69-72 radiators will fit most 73-77s as long as the radiator has the heater hose fitting on it which the 72s had. but I would measure your rad first.
___________________________________________
www.cardomain.com/id/3115ultima
BlackChevelleSS- Management
- Street Cred : 20
Re: Radiators
Mcarlo77 wrote:I found both a copper (pt#CU360 @ $109) and aluminum (pt# CU161 @ $113) on the Autozone site for a '77 Monte 350-4bbl. Doesn't say how many cores, but I'm guessing 3 as another company I've bought radiators from lists a part number of CR161 for a 3-core.
Wonder why it didnt come up when I searched for it . Thanks !
Ok I searched the Spectra website (MFG) the part # for the 4 row is CU165 but it has plastic
tanks.Im going to see what it costs to get it recored and go from there but a least I have the part #
ant7377- G3GM Addict
- Street Cred : 36
Re: Radiators
Ant, let us know what they say about the re-core please. I wanna keep mine if I can have that done cheap enough.
77mali- Donating Member
- Street Cred : 62
Re: Radiators
I will do that .There is only one place here in the area that is supposed to do that . I have to go talk to the guy.
ant7377- G3GM Addict
- Street Cred : 36
G3GM :: G3 Tech :: Engine & Driveline
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Today at 12:58 pm by Keith Seymore
» Roll Call and Car showcase
Today at 10:20 am by g3chevy / Mr Pontiac
» Central Texas Noob
Today at 10:16 am by g3chevy / Mr Pontiac
» Welcome Keith Seymore
Today at 10:03 am by g3chevy / Mr Pontiac
» Wanted: Front park lamp assemblies
Today at 9:57 am by g3chevy / Mr Pontiac
» 75 Hurst Olds T-tpos
Today at 9:44 am by g3chevy / Mr Pontiac
» G3 Chevy rims- help ID these
Tue Oct 29, 2024 8:26 pm by Limey SE
» 75 el camino project.
Mon Oct 28, 2024 12:03 pm by zucchi
» Have had a few questions
Sun Oct 27, 2024 12:04 pm by Limey SE
» vinyl top removal
Sat Oct 26, 2024 11:30 pm by 76Chevelle2Tone