Bumper Fillers!

by bigredlaguna Tue Jul 26, 2011 8:56 am

done

http://www.replica-plastics.com/Manlist.aspx

by pila Tue Jul 26, 2011 10:08 am

I bought some from that place for my '74 Malibu, about 5 years ago. They fit OK, and at least they aren't the rubber type like originals.

by Bret Mullikin Sun Aug 18, 2013 8:44 am

I am still looking for rear bumper fillers for my 74. Can I have some more opinions on aftermarket repros, please?

Thanks,

Bret

by Bret Mullikin Sun Aug 18, 2013 8:52 am

How about E & K bumper fillers? They are ABS and guaranteed not to rot or crack. How do they fit? You can also find them under Sandknit Industries.

by Hawk03 Mon Dec 21, 2015 1:46 pm

Has anyone purchased the 76/77 rear center bumper filler from Replica Plastics? It looks like the correct one but its hard to tell by the pictures.

http://www.replica-plastics.com/product/che-76-rcf-rear-center-filler-73-77/

The right and left rear fillers for the 76/77 don't look correct from the pictures but that could be the pictures.
http://www.replica-plastics.com/product/che-76-rlf-rear-left-filler-73-77/

I just need a base to start with so if they are a decent fit, that will work for me and I will work them until they fit how I want them.

by Limey SE Mon Dec 21, 2015 4:23 pm

Why not Buy the original one I have for sale ???

http://www.g3gm.com/t9794-1976-1977-malibu-rear-bumper-filler

by Hawk03 Mon Dec 21, 2015 4:37 pm

My original one is fine. I need a fiberglass one.

by Limey SE Mon Dec 21, 2015 5:09 pm

10-4

by redrider Sun May 01, 2016 8:36 am

I just got a set of the replica plastics, they are fiberglass and have little give. The mounting holes don't match up and the bumper has to be removed to mount. I ended up taking mine to get painted and letting the shop install them. I don't have the patience and didn't want to mess up the parts.

by jpowen49 Wed Feb 15, 2023 6:13 pm

REPLICA PLASTICS
Ordered the 3 piece set of rear bumper fillers for a 76 chevelle/malibu.
269.00 shipped. Took over 2 months to get them. A total disappointment , I can`t believe they would even ship this cr**. I can make the center piece work with some trimming but the left and right pieces are useless.

by Mcarlo77 Wed Feb 15, 2023 9:11 pm

Unfortunately, this seems to be an ongoing problem over the years with Replica Plastics. Apparently, they still haven't gotten it right.

by g3chevy / Mr Pontiac Thu Feb 16, 2023 12:19 pm

I think I've got a good pair of corner rear bumper fillers on this 76 I dragged home a couple years back. I'll take some close up pics this weekend for you if you're interested.

by jpowen49 Thu Feb 16, 2023 2:33 pm

Thank you g3chevy, I am interested in the fillers. Please post pictures when you get a chance.

by jpowen49 Thu Feb 16, 2023 8:09 pm

I could use a little help with trying to fit the center filler to the tail light bezel panel piece. I need to trim the fiberglass piece to fit the blue metal retainer. I disassembled the car about 15 years ago and didn`t realize it would be this long before I could reassemble. I didn`t have a phone with a camera back then but I did try to bag every thing ( Label not so much ). Can someone tell me what fasteners I need to bolt the two together (10 pcs) ?

Thank you for any help.

by Limey SE Thu Feb 16, 2023 8:42 pm

I just did this on mine around November Maybe October it was small little bolts maybe 7 or 8 mm with captured nut clips Let me see in my Pics if I can find them