help!
5 posters
G3GM :: G3 Tech :: Electrical
Page 1 of 2
Page 1 of 2 • 1, 2
help!
every time i start my car now my temp light on the top left side of my dash bezel keeps flickering on and off. the car is running like normal and nothing seems wrong with it except for that light. wats the problem with it? and none of my gauges work for oil/temp/and amps so i cant really see how high the temp is.
77malibu77- G3GM Senior Member
- Street Cred : 6
Re: help!
Is it after the engine is warmed up or does it happen when you know the engine is cold?
bigredlaguna- G3GM Senior Member
- Street Cred : 53
Re: help!
Sounds like you have a loose ground wire somewhere. JB
JB2wheeler- G3GM Fanatic
- Street Cred : 28
Re: help!
it was right when it started. like the second i start it it was flickering. but then i drove to ace hardware and back and now the light is gone?? wth
where is the ground wire for it jb?
where is the ground wire for it jb?
77malibu77- G3GM Senior Member
- Street Cred : 6
Re: help!
Thats the trouble, its a lot of work finding the right ground wire. I am not an electrician, but if someone had a multimeter they could find it pretty fast. JB
JB2wheeler- G3GM Fanatic
- Street Cred : 28
Re: help!
thanks man. you still needing them seatbelts because i havent had time to run to the post office yet to find out shipping
77malibu77- G3GM Senior Member
- Street Cred : 6
Re: help!
Guess what. I worked on the ones I had and managed to salvage enough of what I had to make them work. I have been out there all day. Got so tired I tried to take a nap and was too tired to go to sleep. So...I wont need them anymore. I am going to a car show tomorrow and hope to sell it. That is the reason I busted my buns trying to get 'er ready. JB
JB2wheeler- G3GM Fanatic
- Street Cred : 28
Re: help!
oh gotcha good luck with selling it. and btw you got one more post til 1000 posts! lol
77malibu77- G3GM Senior Member
- Street Cred : 6
Re: help!
Look for the blue wire in back of the motor I bet its touching something and making the light come on.
ant7377- G3GM Addict
- Street Cred : 36
Re: help!
ant7377 wrote:Look for the blue wire in back of the motor I bet its touching something and making the light come on.
i dont see any
77malibu77- G3GM Senior Member
- Street Cred : 6
Re: help!
Its the original wire for the temp sender for the idiot lights.
ant7377- G3GM Addict
- Street Cred : 36
Re: help!
theres 2 blue wires. one goes to the windsheild washer pump. and one is directly behind the block but its not hooked up to anything? its a really skinny wire
77malibu77- G3GM Senior Member
- Street Cred : 6
Re: help!
It like a 14 gauge wire, that sounds like it . Look at the end see if its snipped or touching something and just tape it off. If it comes on after that you might have a break some place in the wire touching .
ant7377- G3GM Addict
- Street Cred : 36
Re: help!
ant7377 wrote:It like a 14 gauge wire, that sounds like it . Look at the end see if its snipped or touching something and just tape it off. If it comes on after that you might have a break some place in the wire touching .
no its not snipped. it has a plug at the end of it but its not plugged into anything, it must have been touching the engine block somehow.
thanks ant if it comes on i will post something on here again. gave you street cred thanks for the help.
77malibu77- G3GM Senior Member
- Street Cred : 6
Re: help!
Do you have idiot lights or full gauges?
Just wondering.
Just wondering.
74MonteCarlo- G3GM Fanatic
- Street Cred : 17
Re: help!
the idiot lights lol. would love to convert to gauges tho
77malibu77- G3GM Senior Member
- Street Cred : 6
Re: help!
Round or square?
I have the round ones. All MC's came stranded with round idiot lights. Or you could opt for full gauges. I'd love to have 'em too, but I could never take mine out becasue they're original. I did think of what I could do for a tach that would look factory though
I have the round ones. All MC's came stranded with round idiot lights. Or you could opt for full gauges. I'd love to have 'em too, but I could never take mine out becasue they're original. I did think of what I could do for a tach that would look factory though
74MonteCarlo- G3GM Fanatic
- Street Cred : 17
Re: help!
all square
my dash looks like this
except i have an air vent on the left side of the steering wheel instead of the little tray thing. (wish i had one of those trays tho)
my dash looks like this
except i have an air vent on the left side of the steering wheel instead of the little tray thing. (wish i had one of those trays tho)
77malibu77- G3GM Senior Member
- Street Cred : 6
Re: help!
Yep.
The tray came on non air cars. I love mine. Great place for my phone. Unless I floor it from a stop, the it disappears into the great abyss.
The tray came on non air cars. I love mine. Great place for my phone. Unless I floor it from a stop, the it disappears into the great abyss.
74MonteCarlo- G3GM Fanatic
- Street Cred : 17
Re: help!
74MonteCarlo wrote:Yep.
The tray came on non air cars. I love mine. Great place for my phone. Unless I floor it from a stop, the it disappears into the great abyss.
you think it would be possible to put that where the clock goes? id like to find one somewhere. (IF ANYONE HAS ONE LEMME NO! LOL)
77malibu77- G3GM Senior Member
- Street Cred : 6
Re: help!
for real id still love to have one i dont need that air vent anyway lol
77malibu77- G3GM Senior Member
- Street Cred : 6
Re: help!
then i will have a big hole there. ill wait til someone can find me a tray
77malibu77- G3GM Senior Member
- Street Cred : 6
Page 1 of 2 • 1, 2
G3GM :: G3 Tech :: Electrical
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Today at 12:58 pm by Keith Seymore
» Roll Call and Car showcase
Today at 10:20 am by g3chevy / Mr Pontiac
» Central Texas Noob
Today at 10:16 am by g3chevy / Mr Pontiac
» Welcome Keith Seymore
Today at 10:03 am by g3chevy / Mr Pontiac
» Wanted: Front park lamp assemblies
Today at 9:57 am by g3chevy / Mr Pontiac
» 75 Hurst Olds T-tpos
Today at 9:44 am by g3chevy / Mr Pontiac
» G3 Chevy rims- help ID these
Tue Oct 29, 2024 8:26 pm by Limey SE
» 75 el camino project.
Mon Oct 28, 2024 12:03 pm by zucchi
» Have had a few questions
Sun Oct 27, 2024 12:04 pm by Limey SE
» vinyl top removal
Sat Oct 26, 2024 11:30 pm by 76Chevelle2Tone