Second part to impact strip
3 posters
G3GM :: G3 :: General Discussion
Page 1 of 1
Re: Second part to impact strip
77camino wrote:The nos impact strip is actually damaged in the center section. It looks like someone got carried away with a box knife at some point.
Im actually replacing mine with a new one from Bob Cook in my can am group he makes them if you want my Old one when I swap them you can have it pay for shipping its only damage is where it wraps around the side at front If your Cutting for the Guards it might be able to cut off and be good on the rest of it the Middle part is in good shape I believe last i looked
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 98
Re: Second part to impact strip
77camino wrote:The nos impact strip is actually damaged in the center section. It looks like someone got carried away with a box knife at some point.
Ughhh! Those are hard to find!
g3chevy / Mr Pontiac- Donating Member
- Street Cred : 35
Re: Second part to impact strip
BOB COOK CAN AM GROUP makes themg3chevy / Mr Pontiac wrote:77camino wrote:The nos impact strip is actually damaged in the center section. It looks like someone got carried away with a box knife at some point.
Ughhh! Those are hard to find!
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 98
Re: Second part to impact strip
Limey SE wrote:BOB COOK CAN AM GROUP makes themg3chevy / Mr Pontiac wrote:77camino wrote:The nos impact strip is actually damaged in the center section. It looks like someone got carried away with a box knife at some point.
Ughhh! Those are hard to find!
Limey, have you talked to him directly? I thought these were specifically for the Lemans bumpers and would have a different bolt pattern for the mounting studs than for the Chevys???
g3chevy / Mr Pontiac- Donating Member
- Street Cred : 35
Re: Second part to impact strip
g3chevy / Mr Pontiac wrote:Limey SE wrote:BOB COOK CAN AM GROUP makes themg3chevy / Mr Pontiac wrote:77camino wrote:The nos impact strip is actually damaged in the center section. It looks like someone got carried away with a box knife at some point.
Ughhh! Those are hard to find!
Limey, have you talked to him directly? I thought these were specifically for the Lemans bumpers and would have a different bolt pattern for the mounting studs than for the Chevys???
As a Matter of fact I have spoke with him directly and have the the part he makes YOU WHEN YOU BUY IT put the screws in where they are needed its just the strip of bumper and you mount the bolts where you need them depending on your application
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 98
jpowen49 likes this post
Re: Second part to impact strip
This is one of Bob Cooks new Bumper rub strip as you can see the Malibu Bumper is sol close to the same and When you screw it on from the Back Side it looks 1000% factory P.S. He also makes the for Back but not so sure malibu and Can Am are close enough to work yet
Last edited by Limey SE on Thu Apr 06, 2023 11:53 pm; edited 1 time in total
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 98
Re: Second part to impact strip
Limey SE wrote:g3chevy / Mr Pontiac wrote:Limey SE wrote:BOB COOK CAN AM GROUP makes themg3chevy / Mr Pontiac wrote:77camino wrote:The nos impact strip is actually damaged in the center section. It looks like someone got carried away with a box knife at some point.
Ughhh! Those are hard to find!
Limey, have you talked to him directly? I thought these were specifically for the Lemans bumpers and would have a different bolt pattern for the mounting studs than for the Chevys???
As a Matter of fact I have spoke with him directly and have the the part he makes YOU WHEN YOU BUY IT put the screws in where they are needed its just the strip of bumper and you mount the bolts where you need them depending on your application
g3chevy / Mr Pontiac- Donating Member
- Street Cred : 35
Re: Second part to impact strip
Sorry I just realized that statement how I worded made me sound like an Azz HAT I sorry G3 not my intention at all
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 98
g3chevy / Mr Pontiac and 76Chevelle2Tone like this post
Re: Second part to impact strip
I started a new topic about impact strips
77camino- G3GM Enthusiast
- Street Cred : 8
g3chevy / Mr Pontiac likes this post
Re: Second part to impact strip
77camino wrote:I started a new topic about impact strips
Thanks for doing that 77camino! Sometimes we get carried away with a great topic and end up diluting the original intent of the thread. Sorry Jerry!
g3chevy / Mr Pontiac- Donating Member
- Street Cred : 35
Second part to impact strip
Limey SE wrote:Sorry I just realized that statement how I worded made me sound like an Azz HAT I sorry G3 not my intention at all
No worries Limey, I knew what you were trying to get across.
g3chevy / Mr Pontiac- Donating Member
- Street Cred : 35
G3GM :: G3 :: General Discussion
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Today at 11:58 am by Keith Seymore
» Roll Call and Car showcase
Today at 9:20 am by g3chevy / Mr Pontiac
» Central Texas Noob
Today at 9:16 am by g3chevy / Mr Pontiac
» Welcome Keith Seymore
Today at 9:03 am by g3chevy / Mr Pontiac
» Wanted: Front park lamp assemblies
Today at 8:57 am by g3chevy / Mr Pontiac
» 75 Hurst Olds T-tpos
Today at 8:44 am by g3chevy / Mr Pontiac
» G3 Chevy rims- help ID these
Tue Oct 29, 2024 7:26 pm by Limey SE
» 75 el camino project.
Mon Oct 28, 2024 11:03 am by zucchi
» Have had a few questions
Sun Oct 27, 2024 11:04 am by Limey SE
» vinyl top removal
Sat Oct 26, 2024 10:30 pm by 76Chevelle2Tone