oil pan
3 posters
G3GM :: G3 Tech :: Engine & Driveline
Page 1 of 1
oil pan
guys,
I'm starting to gather parts for a new motor. I came across a deal on this pan, I haven't bought it just yet. I took some measurements and it will hang below the front cross member 5/16". I don't really like that. I have kissed the skid plate a few times over the years. Anybody have any issues with one below the cross member?
Look at the Q&A on the link. Someone on here?
https://www.summitracing.com/parts/mil-30955?rrec=true
I'm starting to gather parts for a new motor. I came across a deal on this pan, I haven't bought it just yet. I took some measurements and it will hang below the front cross member 5/16". I don't really like that. I have kissed the skid plate a few times over the years. Anybody have any issues with one below the cross member?
Look at the Q&A on the link. Someone on here?
https://www.summitracing.com/parts/mil-30955?rrec=true
73ss- G3GM Enthusiast
- Street Cred : 11
Re: oil pan
I would stay away from deep pans. Try a pan like this. To me scrapers and windage screens are more important than a deep rear sump. And if you have a longer than 4" stroke, the FRONT end of the pan is more critical to crank windage than the rear sump.
https://www.jegs.com/i/JEGS/555/50232/10002/-1
https://www.jegs.com/i/JEGS/555/50232/10002/-1
bracketchev1221- G3GM Enthusiast
- Street Cred : 16
Re: oil pan
Thanks for the input Ray. Do you see any problems with this one?
https://www.summitracing.com/parts/sum-g3606?rrec=true
Very similar to what you listed but has a different screen set-up. Nothing against Jegs, I'm 5-min from Summit.
https://www.summitracing.com/parts/sum-g3606?rrec=true
Very similar to what you listed but has a different screen set-up. Nothing against Jegs, I'm 5-min from Summit.
73ss- G3GM Enthusiast
- Street Cred : 11
Re: oil pan
Nope no issue at all. I like Summit myself for everything. I'm a Summit Pro Shop member, it was the just the first one that came up in a search, and it just gave the idea I was after. Summit USED to have a pan package that came with that pan, pump, pickup and gasket I think.
bracketchev1221- G3GM Enthusiast
- Street Cred : 16
Re: oil pan
Thanks for the advice. Yes, they do have it in package form. The milodon pan I listed is on the scratch & dent shelf for 50% off. I'd go for it if I was mainly going to race but I don't like the way it hangs down for the street.
If you guys ever get this way to the store give me a shout a day or 2 in advance, we can meet up.
If you guys ever get this way to the store give me a shout a day or 2 in advance, we can meet up.
73ss- G3GM Enthusiast
- Street Cred : 11
Re: oil pan
i ran the competition products pan kit in the 73 worked perfect in it.
https://www.competitionproducts.com/Power-Products-Complete-Oil-Pan-Kit-Chev-BB-Mark-IV/productinfo/PVT21-71488K/#.XZV260ZKhEY
if you do end up with any fabbed pan make sure you clean the crap out of the inside of them, they are full of slag and crap.
https://www.competitionproducts.com/Power-Products-Complete-Oil-Pan-Kit-Chev-BB-Mark-IV/productinfo/PVT21-71488K/#.XZV260ZKhEY
if you do end up with any fabbed pan make sure you clean the crap out of the inside of them, they are full of slag and crap.
___________________________________________
www.cardomain.com/id/3115ultima
BlackChevelleSS- Management
- Street Cred : 20
G3GM :: G3 Tech :: Engine & Driveline
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Today at 11:58 am by Keith Seymore
» Roll Call and Car showcase
Today at 9:20 am by g3chevy / Mr Pontiac
» Central Texas Noob
Today at 9:16 am by g3chevy / Mr Pontiac
» Welcome Keith Seymore
Today at 9:03 am by g3chevy / Mr Pontiac
» Wanted: Front park lamp assemblies
Today at 8:57 am by g3chevy / Mr Pontiac
» 75 Hurst Olds T-tpos
Today at 8:44 am by g3chevy / Mr Pontiac
» G3 Chevy rims- help ID these
Tue Oct 29, 2024 7:26 pm by Limey SE
» 75 el camino project.
Mon Oct 28, 2024 11:03 am by zucchi
» Have had a few questions
Sun Oct 27, 2024 11:04 am by Limey SE
» vinyl top removal
Sat Oct 26, 2024 10:30 pm by 76Chevelle2Tone