Re: stainless steel pipes

by Joe73 Sat Nov 15, 2014 3:06 pm

Very nice. Exactly what I was looking for. Thanks again!!!

by Hawk03 Tue Oct 25, 2016 8:26 am

My system is the Magnaflow 15894. It fits good and sounds great.

stainless steel pipes - Page 2 217310

by Joe73 Tue Oct 25, 2016 8:53 am

Nice tucked exhaust. I'll be going with 73 montes recommendation. No X pipe for me. I don't want to mellow the.tone.

by pila Tue Oct 25, 2016 11:50 pm

X2..nice tucked in pipes.

I used an H pipe to try & make things quieter. It's all stainless, including Borla mufflers. In fact, this past evening I did some mods to the left tail pipe to make it fit better. The tail pipes are for a '72, which wont fit my '75 Elco without some mods.. It's plenty loud even with the H pipe !

stainless steel pipes - Page 2 P1011312_zpskfxztjfb

stainless steel pipes - Page 2 P1011312_zpskfxztjfb

by Hawk03 Wed Oct 26, 2016 8:37 am

Nice Pila!

Is there a better hanger I could use on the rear pipes? I used the U bolts cause that all I had at the time but you can see the end of the bolts from the side of the car. I would like to use something more flush with the pipe so its more hidden.

by Joe73 Wed Oct 26, 2016 8:45 am

can you rotate.the clamp? That's what I usually do so the threads.don't hang down.

by Hawk03 Wed Oct 26, 2016 8:57 am

Joe73 wrote:can you rotate.the clamp? That's what I usually do so the threads.don't hang down.

I thought of that as soon as I hit "send". Thinking aloud helps sometimes. That should probably work. I don't think there is anything that would get in the way if the bolts are going up instead of down.

by Hs1973 Fri Oct 28, 2016 10:24 am

Speaking of exhaust notes, when i first Got my chevelle on the street after years of restoring it i had cherrybombs on it. Nice when you want to Wake up the neighbors, bit not cool when driving long trips. The drone makes me crazy. So i bought flowmaster hushpower and made an H pipe. It sounds ok, loud when you stomp on it and mellow when cruising. So all is cool but i have always be interested in the sound that modern musclecars have, right now we have a new hemi challenger in the shop with borla mufflers on it, and i have a wery destinct sound that i have only heard on newer cars. Is that from the borla muffs only? And i can just buy those? Or is there more to it, i mean a newer camaro with a 350 is not that different from mine exept age and fuel injektion and cats. So do anyone have an ideer If i could get the same sound? Not that im not happy with the Way it sounds right now, but those borla makes a much more mean and potent sound. Mine is just loud.

by pila Fri Oct 28, 2016 7:12 pm

Some time back, a member on here posted a muffler comparison chart. It listed mufflers according to HP & torque as well as decibels of noise....Maybe a search would turn it up....

EDIT...here it is....
http://www.g3gm.com/t3130-muffler-comparisons

I chose Borla mufflers from that list....

by Hs1973 Sat Oct 29, 2016 12:17 pm

Thank you. But i already did a exstensive search on the Web and on youtube for sound examples before going with the hushpower muf. And it fits all the things i was looking for, but it dosent have that exact sound im looking for. I have only heard that on the newer musclecars. So ill try the borla muffs next and see what happens

by fasrnur Sat Oct 29, 2016 5:23 pm

It may be a bit long and I might have posted this here before, but if I could afford them and could figure out how to fit them in mine, I'd do it in a heart beat. I love the sound of 180 degree headers. Very Happy

This guy lives not too far from me and I would love to run across him sometime to see and hear it in person.

by Sponsored content