what size rear end gears came stock in a 75 monte
+5
Limey SE
pila
ant7377
77mali
Joe73
9 posters
G3GM :: G3 :: General Discussion
Page 1 of 1
what size rear end gears came stock in a 75 monte
has a 350 and came with a 4 bbl from the factory, probably a 350 trans
alive 75- G3GM Member
- Street Cred : 0
Re: what size rear end gears came stock in a 75 monte
Diameter? Probably 7.5" Ratio? Matters what options were put in or ordered.
Joe73- Donating Member
- Street Cred : 83
Re: what size rear end gears came stock in a 75 monte
Check your code numbers to cross reference them. There's a bunch of info on here through the home page under Chevy. The code is stamped on the axle, passengers side between the brake hub & the axle housing, on the side that faces to the front of the car, usually.
77mali- Donating Member
- Street Cred : 62
Re: what size rear end gears came stock in a 75 monte
http://www.g3gm.com/Chevrolet-Rear-End-Codes-h25.htm
77mali- Donating Member
- Street Cred : 62
Re: what size rear end gears came stock in a 75 monte
8.5 rear its probably a 2.73 but could even lower.
ant7377- G3GM Addict
- Street Cred : 36
Re: what size rear end gears came stock in a 75 monte
I don't believe the 7.5 was used until the '78 models, G bodies etc The 8.5 will take a lot of punishment, from a small block, at least mine have.
pila- Donating Member
- Street Cred : 43
Re: what size rear end gears came stock in a 75 monte
I think some '77's had 7.5's.
dynchel- Donating Member
- Street Cred : 40
Re: what size rear end gears came stock in a 75 monte
My 77 has a 2.56 ick ick
Limey SE- Management
- Street Cred : 98
Re: what size rear end gears came stock in a 75 monte
2.56 those sound like salt flats gears.Limey wrote:My 77 has a 2.56 ick ick
dynchel- Donating Member
- Street Cred : 40
Re: what size rear end gears came stock in a 75 monte
My '77 Malibu has a 8.5" with 2.56:1 gears. salt flats is right.
Dinomyte- Donating Member
- Street Cred : 11
Re: what size rear end gears came stock in a 75 monte
Most seem to come with 3.08 or 2.73. Spin the tire by hand and count the rotations of the driveshaft compared to the tire.
Pontichev327- G3GM Enthusiast
- Street Cred : 7
Re: what size rear end gears came stock in a 75 monte
yeah i was thinking about counting the rotation of the drive-shaft, thanks for the info
alive 75- G3GM Member
- Street Cred : 0
Similar topics
» Was rear ended in the Monte today...
» Max tire size for 73 Monte Carlo
» Monte Carlo rear window????
» Max tire size for 73 Monte Carlo
» Monte Carlo rear window????
G3GM :: G3 :: General Discussion
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Thu Dec 05, 2024 10:41 am by zucchi
» I have posted on here for info and help
Thu Dec 05, 2024 12:11 am by muldokken
» Roll Call and Car showcase
Fri Nov 29, 2024 5:24 pm by 76Chevelle2Tone
» Happy Thanksgiving 2024
Thu Nov 28, 2024 12:21 pm by Limey SE
» Life & Back On The Radio
Thu Nov 28, 2024 1:46 am by knightfan26917
» Monte Carlo -75
Wed Nov 27, 2024 12:57 pm by Finn Monte
» 1974 Pontiac Grand Prix
Mon Nov 25, 2024 5:06 pm by Iggy
» Ads
Mon Nov 25, 2024 12:52 am by 76Chevelle2Tone
» 1975 El Camino - long term project
Sun Nov 24, 2024 8:33 pm by tgaetto
» station wagon tailgate release
Sat Nov 23, 2024 8:28 pm by bucket