G3 Concepts & Renderings
+16
Limey SE
1973montec
JB2wheeler
thatfnthing
Famstyle
1973 454 MONTE
Trbulnc
Hawk03
Tom77
switchbiker
Dinomyte
jurgenday
dutch wagon
Mcarlo77
DoctorLarry
ant7377
20 posters
G3GM :: G3 :: General Discussion
Page 4 of 11
Page 4 of 11 • 1, 2, 3, 4, 5 ... 9, 10, 11
Re: G3 Concepts & Renderings
You are definitely getting quite good at this!
thatfnthing- Donating Member
- Street Cred : 65
Re: G3 Concepts & Renderings
Almost makes we want to go out and buy a wagon! Nice job with that rendition!
Mcarlo77- Donating Member
- Street Cred : 78
Re: G3 Concepts & Renderings
I really like how it turned out. I like the wheels. I think it was a nice touch, but those are not just 15's. They are more like 18's at least. I'd drive it!
driveit- Donating Member
- Street Cred : 15
Re: G3 Concepts & Renderings
A work in progress laguna soon to be gasser. Hopefully I will have it buttoned up tonight. Just what I have done so far has taken about 3 hours to do. Would be quicker if I had a mouse or a tablet with a pen. Doing it all with the track pad on my laptop.
driveit- Donating Member
- Street Cred : 15
Re: G3 Concepts & Renderings
cant see it i see a smale red cross??
dutch wagon- Donating Member
- Street Cred : 0
1973montec- Donating Member
- Street Cred : 17
Re: G3 Concepts & Renderings
oops my bad Â
wrong computer settings.
but it sure looks good!!
wrong computer settings.
but it sure looks good!!
dutch wagon- Donating Member
- Street Cred : 0
Re: G3 Concepts & Renderings
Driveit you should call Chip Foose & see if he's looking to take on an apprentice.
I'm picturing that big ole g3 gasser screaming down the 1/4 with an L-88 on 110 octane doing 115 mph at the finish line...You made my day!
I'm picturing that big ole g3 gasser screaming down the 1/4 with an L-88 on 110 octane doing 115 mph at the finish line...You made my day!
77mali- Donating Member
- Street Cred : 62
Re: G3 Concepts & Renderings
Awesome. I would love to meet him some day. Love his drawings. I am sure he is a lot faster than I am. That last one took about 9 hours total to do.
driveit- Donating Member
- Street Cred : 15
Re: G3 Concepts & Renderings
Update of the gasser. Â Borrowed the road image, but added the car with the updates and the text at the top.
driveit- Donating Member
- Street Cred : 15
Re: G3 Concepts & Renderings
I think that is just awesome! Now I need to start finding all the parts I need.
jurgenday- G3GM Member
- Street Cred : 1
Re: G3 Concepts & Renderings
SWEEEEETTT!!!! Doc! And isee your in Indiana too!!!       Â
Famstyle- G3GM Member
- Street Cred : 2
Re: G3 Concepts & Renderings
Came across this today.
1973 Pontiac Grand Am
1973 Pontiac Grand Am
driveit- Donating Member
- Street Cred : 15
Re: G3 Concepts & Renderings
Looks nice, I hate to be the one to point out that would be tough to tuck that mych tire and still have that much ground clearance unless you were to channel the body and drop it over the frame a few inches, plus in the rear the quarter panel would need to be bulged a few inches to keep the tire from hitting the angle that comes in from the beltline to the top body line on the panel, unless the tire is inset more than it appears. Good drawings though, I might have you do one for me once I can get out and take some quality pics of my car to use as a guide.driveit wrote:Update of my car.
switchbiker- Donating Member
- Street Cred : 3
Re: G3 Concepts & Renderings
This is the updated one in my signature, but It will not be that low and unfortunately will not tuck that well.
I would at least like to get a look similar to these.
This is a members car. This is exactly what I am looking for as far as size and stance.
Wheels: Rushforth Fuel 19x8, front; 20x10, rear
Tires: Nitto 275/35R19, front; 315/35R20, rear
http://www.superchevy.com/features/chevellemontecarlo/sucs_1033_bryan_groves_1974_chevy_chevelle_malibu/viewall.html
I would at least like to get a look similar to these.
This is a members car. This is exactly what I am looking for as far as size and stance.
Wheels: Rushforth Fuel 19x8, front; 20x10, rear
Tires: Nitto 275/35R19, front; 315/35R20, rear
http://www.superchevy.com/features/chevellemontecarlo/sucs_1033_bryan_groves_1974_chevy_chevelle_malibu/viewall.html
driveit- Donating Member
- Street Cred : 15
Re: G3 Concepts & Renderings
I did this in Photoshop, not finished, but this is the idea I had for my completed car. Gotta love the hockey stick.
switchbiker- Donating Member
- Street Cred : 3
Re: G3 Concepts & Renderings
I really like that. Especially the hockey stick!
driveit- Donating Member
- Street Cred : 15
Re: G3 Concepts & Renderings
That's one Lean Mean Green Machine . . . The hockey stick is very original.
Dinomyte- Donating Member
- Street Cred : 11
Re: G3 Concepts & Renderings
I posted these a while back but I figured I post them here also.  The car has a chopped Lincoln roof with door frames from a maverick. Oh btw, baad is the owners last name. Â
dynchel- Donating Member
- Street Cred : 40
Page 4 of 11 • 1, 2, 3, 4, 5 ... 9, 10, 11
G3GM :: G3 :: General Discussion
Page 4 of 11
Permissions in this forum:
You cannot reply to topics in this forum
Fri Nov 29, 2024 5:24 pm by 76Chevelle2Tone
» Need radio help
Thu Nov 28, 2024 10:48 pm by 76Chevelle2Tone
» Happy Thanksgiving 2024
Thu Nov 28, 2024 12:21 pm by Limey SE
» Life & Back On The Radio
Thu Nov 28, 2024 1:46 am by knightfan26917
» Monte Carlo -75
Wed Nov 27, 2024 12:57 pm by Finn Monte
» 1974 Pontiac Grand Prix
Mon Nov 25, 2024 5:06 pm by Iggy
» Ads
Mon Nov 25, 2024 12:52 am by 76Chevelle2Tone
» 1975 El Camino - long term project
Sun Nov 24, 2024 8:33 pm by tgaetto
» station wagon tailgate release
Sat Nov 23, 2024 8:28 pm by bucket
» 14 Month Battle / Search is over
Sat Nov 23, 2024 7:19 pm by 76 Malibu