G3GM
Would you like to react to this message? Create an account in a few clicks or log in to continue.

swap gears?

+5
Landonus
rebel101150
Graham Perkins
dynchel
pila
9 posters

Page 2 of 2 Previous  1, 2

Go down

swap gears? - Page 2 Empty Re: swap gears?

Post by rebel101150 Wed Dec 26, 2012 12:37 am

uh use a qoute because i have no idea what your talking about.

rebel101150
G3GM Member
G3GM Member

Street Cred : 0

Back to top Go down

swap gears? - Page 2 Empty Re: swap gears?

Post by Landonus Wed Dec 26, 2012 12:44 am

Graham Perkins wrote:Hi,
To answer landonus question, the 454 isn't anything crazy it has a cam ,headers, holley 750 double pumper, performer intake. The speedo doesn't work but keeping up with traffic on the hwy the tack is around 2800-2900 rpm. Oh by the way I need the cruise control box that sits on the lhs inner fender to get my speedo working if anyone has one for sale.

Thanks Graham

This box?

swap gears? - Page 2 2012-112
Landonus
Landonus
Donating Member
Donating Member

Street Cred : 5

Back to top Go down

swap gears? - Page 2 Empty Re: swap gears?

Post by dragons_lair59 Wed Dec 26, 2012 7:34 am

the onr in front right of pic landon remind me and ill make sure it works lol
dragons_lair59
dragons_lair59
Donating Member
Donating Member

Street Cred : 11

Back to top Go down

swap gears? - Page 2 Empty Re: swap gears?

Post by JB2wheeler Wed Dec 26, 2012 7:15 pm

Sounds to me like you are asking too much from that little 350. I am not familur with the model # for your 350, but if you do not have an extremely hot cam and big heads you do not want your gears too low. 3.08 sounds about right for what you have and are asking from it. You get 3.73 gears and you WILL run out of steam in high RPMs. I have 3.42 gears and it is a pain at 70 MPH, it's not comfortable. I can stomp down on the gas and spin my back tires at 70 MPH, but am running 540 cubes with about as many ponies. JB
JB2wheeler
JB2wheeler
G3GM Fanatic
G3GM Fanatic

Street Cred : 28

Back to top Go down

swap gears? - Page 2 Empty Re: swap gears?

Post by Joe73 Wed Dec 26, 2012 7:20 pm

JB2wheeler wrote:Sounds to me like you are asking too much from that little 350. I am not familur with the model # for your 350, but if you do not have an extremely hot cam and big heads you do not want your gears too low. 3.08 sounds about right for what you have and are asking from it. You get 3.73 gears and you WILL run out of steam in high RPMs. I have 3.42 gears and it is a pain at 70 MPH, it's not comfortable. I can stomp down on the gas and spin my back tires at 70 MPH, but am running 540 cubes with about as many ponies. JB


X2.

3.42 are not comfortable with a 1:1 final gear in a trans which is what at TH350, 400 and muncie have. 3.08 would fit your needs.
Joe73
Joe73
Donating Member
Donating Member

Street Cred : 83

Back to top Go down

swap gears? - Page 2 Empty Re: swap gears?

Post by 1973 454 MONTE Wed Dec 26, 2012 8:37 pm

Graham Perkins wrote:Hi,
To answer landonus question, the 454 isn't anything crazy it has a cam ,headers, holley 750 double pumper, performer intake. The speedo doesn't work but keeping up with traffic on the hwy the tack is around 2800-2900 rpm. Oh by the way I need the cruise control box that sits on the lhs inner fender to get my speedo working if anyone has one for sale.

Thanks Graham


you dont have to get a box just to get it working. take the cable that comes out the firewall and feed it to your tranny,swap out with other cable already hooked up to the tranny and Wala.
1973 454 MONTE
1973 454 MONTE
Donating Member
Donating Member

Street Cred : 36

Back to top Go down

swap gears? - Page 2 Empty Re: swap gears?

Post by Sponsored content


Sponsored content


Back to top Go down

Page 2 of 2 Previous  1, 2

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum