Swivel Buckets!!!!!
+4
74MonteCarlo
74Malibu383
Roadcaptain S3
1973 454 MONTE
8 posters
Swivel Buckets!!!!!
I have a benchseat in my car and i would love to swap in Swivel Buckets. SOOOOO i picked up some from a Monte Carlo and now im lost in putting them in they seem like they sit to high. and i was planing on sticking in a 85 camaro console but i think that when i swivel the seat it will come in contact with the console. please help im all most to the hair pulling stage.
Thanks
Thanks
jared76- G3GM Member
- Street Cred : 0
Re: Swivel Buckets!!!!!
the buckets sit on the floor,not on the selt belt retractors like the bench does. you will need to take out the bench retractors. mount the buckets to the front outer bolt hole from the bench. then you will be lower and you can make mountings for the other 3 legs.
1973 454 MONTE- Donating Member
- Street Cred : 36
Re: Swivel Buckets!!!!!
you can also use Cutlass Gran Prix and Buick center console besides chevelle
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 98
Re: Swivel Buckets!!!!!
1973 454 MONTE wrote: the buckets sit on the floor,not on the selt belt retractors like the bench does. you will need to take out the bench retractors. mount the buckets to the front outer bolt hole from the bench. then you will be lower and you can make mountings for the other 3 legs.
Yup, and you're gonna need new belts and retractors as well. You'll probably also have to make brackets for the console.
Roadcaptain S3- Donating Member
- Street Cred : 26
Re: Swivel Buckets!!!!!
1973 454 MONTE wrote: the buckets sit on the floor,not on the selt belt retractors like the bench does. you will need to take out the bench retractors. mount the buckets to the front outer bolt hole from the bench. then you will be lower and you can make mountings for the other 3 legs.
Thats what i did and it still felt a little high.
Ill work out the kinks when i roll it in my shop again.
thanks
jared76- G3GM Member
- Street Cred : 0
Re: Swivel Buckets!!!!!
Roadcaptain S3 wrote:1973 454 MONTE wrote: the buckets sit on the floor,not on the selt belt retractors like the bench does. you will need to take out the bench retractors. mount the buckets to the front outer bolt hole from the bench. then you will be lower and you can make mountings for the other 3 legs.
Yup, and you're gonna need new belts and retractors as well. You'll probably also have to make brackets for the console.
I figured, i am going to get my retractors out of a earlier Abody. i think i can pull the belt out of mine and put the retractor and reuse my belt.
thanks
jared76- G3GM Member
- Street Cred : 0
Re: Swivel Buckets!!!!!
Limey wrote:you can also use Cutlass Gran Prix and Buick center console besides chevelle
those are hard to find. i have looked for one and the cheapest i can find is $250 so im going to just make a console from scratch to fit a megashifter.
thanks
jared76- G3GM Member
- Street Cred : 0
Re: Swivel Buckets!!!!!
I have an original black Laguna console if you are interested. It woud definitley fit with your new seats. I think the hinge is broke on the lid, but the rest is in good shape. If you're interested let me know, I'll get some photos tomorrow for you.
74Malibu383- Donating Member
- Street Cred : 26
Re: Swivel Buckets!!!!!
74Malibu383 wrote:I have an original black Laguna console if you are interested. It woud definitley fit with your new seats. I think the hinge is broke on the lid, but the rest is in good shape. If you're interested let me know, I'll get some photos tomorrow for you.
sorry about being a little slow with posting but i want to go with a different console. im not a fan of the stock one. but if you dont mind could you post the size of the section that sitts between the seats.
thanks
jared76- G3GM Member
- Street Cred : 0
Re: Swivel Buckets!!!!!
thats why I went with the cutlass console, it has the neat storage door in the front
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 98
Re: Swivel Buckets!!!!!
Limey wrote:thats why I went with the cutlass console, it has the neat storage door in the front
LOL, I used that slider a lot in my salon back in the day. Good place to store "cassettes". Looks good too. Wish the dash from a Cutlass or a GP was easy to swap in. I like those too. The GP's had those consoles that "tilted" toward the driver. You should look at that design. There are a couple on EB right know.
http://cgi.ebay.com/ebaymotors/SPORTY-ESTATE-SURVIVOR-1974-Pontiac-Grand-Prix-51K-MI-/120763587183?pt=US_Cars_Trucks&hash=item1c1e121a6f
http://cgi.ebay.com/ebaymotors/1977-Pontiac-Grand-Prix-LJ-/220829089982?pt=US_Cars_Trucks&hash=item336a7080be
77mali- Donating Member
- Street Cred : 62
Re: Swivel Buckets!!!!!
funny you mention this for I still have the Dash from the same cutlass the console came from and has Rally Pak gauges ( OLDS version anyways )
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 98
Re: Swivel Buckets!!!!!
Limey wrote:thats why I went with the cutlass console, it has the neat storage door in the front
I like the look but i dont want to move my smancy (fancy) box i made for my radio and tach...
jared76- G3GM Member
- Street Cred : 0
Re: Swivel Buckets!!!!!
I like that you didnt destroy your dash to put that aftermarket radio in
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 98
Re: Swivel Buckets!!!!!
Limey wrote:I like that you didnt destroy your dash to put that aftermarket radio in
x2
74MonteCarlo- G3GM Fanatic
- Street Cred : 17
Re: Swivel Buckets!!!!!
I hate cutting into good metal. I found a guy that has a tilt and a console out of a 76 442. im going to call tomorrow about.
If i get those im going to make a DIN inside of it and still be able to roll the door down cuz i mainly use my iphone for music so i dont mess with the face that much. and ill mount the tach off the side of it.
HOw hard would it be to shoehorn a megashifter under the 442 console. i think i can make my own bezel for it.
If i get those im going to make a DIN inside of it and still be able to roll the door down cuz i mainly use my iphone for music so i dont mess with the face that much. and ill mount the tach off the side of it.
HOw hard would it be to shoehorn a megashifter under the 442 console. i think i can make my own bezel for it.
jared76- G3GM Member
- Street Cred : 0
Re: Swivel Buckets!!!!!
ask and ye shall get
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 98
Re: Swivel Buckets!!!!!
Limey wrote:ask and ye shall get
AWSOME!!!!! thanks a lot Limey!!
BTW what section of Illinois do you live in.
jared76- G3GM Member
- Street Cred : 0
Re: Swivel Buckets!!!!!
i am about 95 minutes west of chicago, why you ask ???
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 98
Re: Swivel Buckets!!!!!
Limey wrote:i am about 95 minutes west of chicago, why you ask ???
Just wondering because we are viod of G3s down near stl,
jared76- G3GM Member
- Street Cred : 0
Re: Swivel Buckets!!!!!
Jared is your car painted light buckskin? (Factory color code 61 on the trim tag)
77mali- Donating Member
- Street Cred : 62
Re: Swivel Buckets!!!!!
jared76 wrote:Limey wrote:i am about 95 minutes west of chicago, why you ask ???
Just wondering because we are viod of G3s down near stl,
LoL, they all traveled Southwest of you to Tulsa!
The Dude- Management
- Street Cred : 48
Re: Swivel Buckets!!!!!
77mali wrote:Jared is your car painted light buckskin? (Factory color code 61 on the trim tag)
Yes it is
and this is my new console
jared76- G3GM Member
- Street Cred : 0
Permissions in this forum:
You cannot reply to topics in this forum
Yesterday at 7:58 pm by 76 Malibu
» Stroh's Fabrication Bucket Seat/Console Brackets - Review
Yesterday at 7:57 pm by 76 Malibu
» 74 Elcamino project
Yesterday at 11:55 am by gman
» Dual exhaust for 75 fourdoor
Wed Jan 15, 2025 7:17 pm by ag_eet
» 1973 Chevelle SS shifter knob
Wed Jan 15, 2025 9:19 am by Mitchell Murphy
» Grand Lemans - SoCal - $800
Tue Jan 14, 2025 11:34 pm by g3chevy / Mr Pontiac
» G3GM Decals/stickers Now Available for purchase.
Sun Jan 12, 2025 5:07 pm by Limey SE
» G3 Cars at Mecum Kissimmee
Sat Jan 11, 2025 1:07 pm by Limey SE
» Hey Zucchi
Sat Jan 11, 2025 1:06 pm by Limey SE
» Need radio help
Fri Jan 10, 2025 6:10 pm by 73 ss wgn