swivel seat shell repair
4 posters
swivel seat shell repair
Is there a preferred way to repair my existing seat backs? They are chalky and have some deep gouges in the surface. I have no idea of what kind of plastic they are, but they did not age well(like I did?).
StaggerLee- G3GM Newbie
- Street Cred : 0
Re: swivel seat shell repair
I had some spare black ones with similar issues. The best you can do is sand it all down and repaint with a plastic compatible paint like SEM. The chalky surface must be removed as it doesn't lend itself well as a solid base for paint (I know this from experience). Of course, this will remove the factory texture of the plastic. I know SEM makes a textured paint, but have no experience with it. Be sure and use a compatible adhesion promoter.
Mcarlo77- Donating Member
- Street Cred : 78
Re: swivel seat shell repair
thanks for the info....really glad to hear they are salvageable. Fortunately, i am not a purist, as my el caminos range from a rolling wreck to a listing hulk!!
StaggerLee- G3GM Newbie
- Street Cred : 0
76Chevelle2Tone likes this post
Re: swivel seat shell repair
StaggerLee wrote:thanks for the info....really glad to hear they are salvageable. Fortunately, i am not a purist, as my el caminos range from a rolling wreck to a listing hulk!!
If wanted the Texture could try and use the Textured dash Paint from SEM
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 98
Re: swivel seat shell repair
When I did mine I
1 - sanded them down to remove the "gouges" that existed,
2 - a good cleaning to get rid of all oils etc
3 - a light coat of rocker guard on them to give the desired texture
3b- optionally you can sand this stage and then clean again, if you want the texture a little flatter
4 - and lastly a couple of coats of SEM paint
they still look great by my standards, but the old girl doesn't get many riders in the back seat so it's hard to say how well this stands up to wear and tear.
enjoy
1 - sanded them down to remove the "gouges" that existed,
2 - a good cleaning to get rid of all oils etc
3 - a light coat of rocker guard on them to give the desired texture
3b- optionally you can sand this stage and then clean again, if you want the texture a little flatter
4 - and lastly a couple of coats of SEM paint
they still look great by my standards, but the old girl doesn't get many riders in the back seat so it's hard to say how well this stands up to wear and tear.
enjoy
Dinomyte- Donating Member
- Street Cred : 11
Re: swivel seat shell repair
sounds like a good process for this winter...thanks for the input
StaggerLee- G3GM Newbie
- Street Cred : 0
Permissions in this forum:
You cannot reply to topics in this forum
Thu Jan 23, 2025 2:19 pm by Finn Monte
» chevelle exhaust pipes (stock)
Wed Jan 22, 2025 3:34 pm by 76Chevelle2Tone
» Life & Back On The Radio
Mon Jan 20, 2025 3:36 pm by knightfan26917
» 74 Elcamino project
Sat Jan 18, 2025 5:09 pm by gman
» 1973 Chevelle Parts For Sale - Steering Wheel and Column
Fri Jan 17, 2025 7:58 pm by 76 Malibu
» Stroh's Fabrication Bucket Seat/Console Brackets - Review
Fri Jan 17, 2025 7:57 pm by 76 Malibu
» Dual exhaust for 75 fourdoor
Wed Jan 15, 2025 7:17 pm by ag_eet
» 1973 Chevelle SS shifter knob
Wed Jan 15, 2025 9:19 am by Mitchell Murphy
» Grand Lemans - SoCal - $800
Tue Jan 14, 2025 11:34 pm by g3chevy / Mr Pontiac
» G3GM Decals/stickers Now Available for purchase.
Sun Jan 12, 2025 5:07 pm by Limey SE