G3GM
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Coolant Temp Sender

3 posters

Go down

Coolant Temp Sender Empty Coolant Temp Sender

Post by Mcarlo77 Sun Nov 25, 2018 3:47 pm

Can someone confirm whether or not it's necessary to drain the coolant when replacing the Gauge/Warning Light Coolant Temp Sensor that's located between cylinders #1 and #3 below the exhaust manifold? Or, will just a little coolant seep out if it's not drained?
Mcarlo77
Mcarlo77
Donating Member
Donating Member

Street Cred : 78

Back to top Go down

Coolant Temp Sender Empty Re: Coolant Temp Sender

Post by Joe73 Sun Nov 25, 2018 5:07 pm

It will leak out until the level in the rad is equal to the left so of the sender. You might be able to do a quick swap and not lose much.
Joe73
Joe73
Donating Member
Donating Member

Street Cred : 83

Back to top Go down

Coolant Temp Sender Empty Re: Coolant Temp Sender

Post by fasrnur Sun Nov 25, 2018 6:07 pm

I agree with Joe. Any water in the intake or head above it will drain out when you remove it. If you're quick, you won't lose much.
fasrnur
fasrnur
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 9

Back to top Go down

Coolant Temp Sender Empty Re: Coolant Temp Sender

Post by Mcarlo77 Sun Nov 25, 2018 6:23 pm

Thanks, gentlemen...I suspected as much. It's too cold now to be messing with spilled coolant...so, this goes on the back burner until Spring.
Mcarlo77
Mcarlo77
Donating Member
Donating Member

Street Cred : 78

Back to top Go down

Coolant Temp Sender Empty Re: Coolant Temp Sender

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum