G3GM
Would you like to react to this message? Create an account in a few clicks or log in to continue.

G3GM 1973 to 1977 A-bodys. Chevelles, Monte Carlos, El Caminos, Laguna, 442, Cutlass, Malibu, GTO, LeMans, Century, Regal, Grand Am, Grand Prix, Sprint, Gran Sport, Can Am, Hurst-olds, and other 73-77 A-bodies


Anyone parting a G3?? E-Brake mounting tab needed.

3 posters

G3GM :: Classifieds :: Wanted

Go down

Anyone parting a G3?? E-Brake mounting tab needed. Empty Anyone parting a G3?? E-Brake mounting tab needed.

Post by Joe73 Tue Jul 31, 2018 4:57 pm

Anyone have a G3 their parting out?  I need the small tab that the single bolt of the e-brake cable bolts too.  To explain it better, our e-brake lever has two studs on the front that bolt through the firewall.  But on the front side (near the release cable), there is a single bolt that goes horizontally into the hinge post.  Theres a small vertical piece of metal there with a nut welded to it.  I need that piece.  Attached is a pic of it but the vertical nut is missing.  

Anyone parting something out that can cut it out for me?  Please PM me what you want for it.  Thanks

Anyone parting a G3?? E-Brake mounting tab needed. E-brak10
Joe73
Joe73
Donating Member
Donating Member

Street Cred : 83

Back to top Go down

Anyone parting a G3?? E-Brake mounting tab needed. Empty Re: Anyone parting a G3?? E-Brake mounting tab needed.

Post by 73ss Wed Aug 01, 2018 6:22 pm

I know where there is a elco sitting. I haven't seen the guy in a year. I'll stop by this week and see if he still has it. He was a member here at one time.

Couldn't you tack a nut on the piece you have?
73ss
73ss
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 11

Back to top Go down

Anyone parting a G3?? E-Brake mounting tab needed. Empty Re: Anyone parting a G3?? E-Brake mounting tab needed.

Post by Joe73 Wed Aug 01, 2018 6:41 pm

I'm waiting to see if limey comes back with the part from his buddy. Otherwise I'm just going to take a small piece of heavy angle iron and tack a nut to the back of it. Pretty easy fix but I'd like to have the right piece.
Joe73
Joe73
Donating Member
Donating Member

Street Cred : 83

Back to top Go down

Anyone parting a G3?? E-Brake mounting tab needed. Empty Re: Anyone parting a G3?? E-Brake mounting tab needed.

Post by 73ss Wed Aug 01, 2018 6:50 pm

OK, I'll see if the elco is still there in the meantime.
73ss
73ss
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 11

Back to top Go down

Anyone parting a G3?? E-Brake mounting tab needed. Empty Re: Anyone parting a G3?? E-Brake mounting tab needed.

Post by crice63 Fri Aug 03, 2018 12:58 am

Is it on a regular Laguna? I’m sitting on a 73, I’ll check in the morning.

crice63
Donating Member
Donating Member

Street Cred : 2

Back to top Go down

Anyone parting a G3?? E-Brake mounting tab needed. Empty Re: Anyone parting a G3?? E-Brake mounting tab needed.

Post by Joe73 Fri Aug 03, 2018 7:07 am

Yes, any GM vehicle should have that horizontal bolt on it going into that tab. I'm still waiting if Limey located one. I'll let you know. Thank you.
Joe73
Joe73
Donating Member
Donating Member

Street Cred : 83

Back to top Go down

Anyone parting a G3?? E-Brake mounting tab needed. Empty Re: Anyone parting a G3?? E-Brake mounting tab needed.

Post by Joe73 Sat Aug 04, 2018 4:05 pm

Thanks for the responses. I have the part on the way !! Thanks
Joe73
Joe73
Donating Member
Donating Member

Street Cred : 83

Back to top Go down

Anyone parting a G3?? E-Brake mounting tab needed. Empty Re: Anyone parting a G3?? E-Brake mounting tab needed.

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

G3GM :: Classifieds :: Wanted

 
Permissions in this forum:
You cannot reply to topics in this forum