G3GM
Would you like to react to this message? Create an account in a few clicks or log in to continue.

G3GM 1973 to 1977 A-bodys. Chevelles, Monte Carlos, El Caminos, Laguna, 442, Cutlass, Malibu, GTO, LeMans, Century, Regal, Grand Am, Grand Prix, Sprint, Gran Sport, Can Am, Hurst-olds, and other 73-77 A-bodies


sweet looking 73

4 posters

G3GM :: Media :: G3 Project Pictures

Go down

sweet looking 73 Empty sweet looking 73

Post by ziyatansu Tue Nov 21, 2017 8:25 pm

found this in Instagram. look really clean. I contacted the owner he said he pushed the bumber inside and painted it car color.

sweet looking 73 Img_1520
ziyatansu
ziyatansu
G3GM Member
G3GM Member

Street Cred : 0

Back to top Go down

sweet looking 73 Empty Re: sweet looking 73

Post by fasrnur Wed Nov 22, 2017 9:16 pm

sweet looking 73 Bumper10
sweet looking 73 Bumper11
sweet looking 73 Kimg0010
sweet looking 73 20900710
I tucked both ends of mine this past spring The next step will bill narrowing them to bring them in closer to the body  on the sides. I know some people don't like this when we do it to our cars, but I like it.
fasrnur
fasrnur
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 9

Back to top Go down

sweet looking 73 Empty Re: sweet looking 73

Post by ziyatansu Wed Nov 22, 2017 10:57 pm

looks neat. what was the process behind it?
ziyatansu
ziyatansu
G3GM Member
G3GM Member

Street Cred : 0

Back to top Go down

sweet looking 73 Empty Re: sweet looking 73

Post by REVINKEVIN / Mr. 600+HP Fri Nov 24, 2017 9:45 pm

Here is a neat article. I will be doing the rear bumper on my Laguna pretty soon and I will post my pics.

http://www.hotrod.com/articles/1976-chevy-camaro-how-to-fix-ugly-1970s-bumpers/#1975-chevy-laguna-rear-bumper-trial-fit-jpg
REVINKEVIN / Mr. 600+HP
REVINKEVIN / Mr. 600+HP
G3GM Senior Member
G3GM Senior Member

Street Cred : 20

Back to top Go down

sweet looking 73 Empty Re: sweet looking 73

Post by Oldschool454 Sat Nov 25, 2017 11:48 am

I did both bumpers on my two 76 Lagunas. made a night and day difference in looks. And even for someone with minimal welding experience like myself it was a pretty easy job. Though I used a sawzall and took about a 2 inch section out of each side below the tail lights. If u have a steady hand and can follow a straight line it's pretty easy and the cut ends but right up to each other nice and flush with minimal body work needed to mask the cuts. And to push it in, on my green car I drilled holes in the shocks and let the fluid out. Then pushed in to where I wanted and spot welded shock so it wouldn't move again. then adjusted/slid bumper up to take out the gap between bumper and tail light panel. On my silver car I just took out the inner bumper and shocks altogether and made some L brackets to hold the bumper on.
Oldschool454
Oldschool454
G3GM Member
G3GM Member

Street Cred : 5

Back to top Go down

sweet looking 73 Empty Re: sweet looking 73

Post by REVINKEVIN / Mr. 600+HP Sat Nov 25, 2017 1:07 pm

I like this car more and more every time I look at it.  They have this bumper tucked up real nice.  It looks like they are still working on the quarter window block off deal but still neat.  295 tires all around.  

sweet looking 73 15_x_110
REVINKEVIN / Mr. 600+HP
REVINKEVIN / Mr. 600+HP
G3GM Senior Member
G3GM Senior Member

Street Cred : 20

Back to top Go down

sweet looking 73 Empty Re: sweet looking 73

Post by fasrnur Sat Nov 25, 2017 7:18 pm

That car is SO cool and he's a member here as you know. He goes by Teamblazer if my memory serves me correctly. There is a very big build page on the internet, but all his pictures were in photobucket and after what happened there, you can read the build, but can't see any pictures.
fasrnur
fasrnur
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 9

Back to top Go down

sweet looking 73 Empty Re: sweet looking 73

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

G3GM :: Media :: G3 Project Pictures

 
Permissions in this forum:
You cannot reply to topics in this forum